Shampoo processing steps

Shampooing process steps, shampooing is more frequent than bathing, once a day or two on average, especially in hot summer, when we are in the barber shop, we will find that washing our hair is cleaner, which has a lot to do with the technique. Let's take a look at the process steps of shampooing.

Steps in the shampoo process 1 Focus on the muscles on both sides of the neck, shoulders and spine. The gesture is slow and heavy, and the sitting posture of the guests can be adjusted at any time. When pressing the neck, hold the guest's forehead with one hand and try not to make the guest's body shake too much. Remember not to use brute force, it is too fast. The more muscular the guests are, the more they should use gentle strength to gradually penetrate and achieve the purpose of relaxing the guests. The technology is as follows:

1. After foaming, grab the center from the edge with one hand, and the foam crosses the hairline with 1cm. Hold the hair with the other hand and change hands with the other hand after a lap.

2. Then grab the scalp from the outside to the inside, pile the hair on the top of your head and massage for a while.

3. After washing, let the guests lie down first, squeeze their hair dry first, wrap the hair with a towel to avoid dripping water, guide the guests back to their seats, and then massage or blow dry with shiatsu.

Extended data

Shampoo steps and methods:

Step 1: Dry and comb your hair before shampooing. The purpose is to loosen the dirt and scales (dead cells) on the scalp, dredge the hair and reduce hair loss when shampooing.

Step 2: Generally, the water used for shampoo is about 37-38℃, and it should not be too hot. Wet your hair for pre-washing, insert your fingers into your hair to massage your scalp, carefully rub it, clean every part of your scalp, and massage your scalp for more than one minute. By pre-washing, 70% dirt and oil stains on the scalp can be washed away, which increases the foaming power of shampoo.

Step 3: Pour the shampoo into the palm of your hand, dilute it with water, and knead it to foam. Don't directly pour shampoo on your hair to foam, which will over-stimulate your scalp, produce dandruff and hurt your hair.

Step 4: Pull out the hair, evenly knead the foaming shampoo into the hair shaft with your fingertips, and gently massage with your fingertips until a thick layer of foam is formed.

Step 5: Rinse your hair until it is completely washed, and rinse it simply for 3-5 minutes. Then add a teaspoon of shampoo to foam again, gently rub the scalp, this time clean the hair roots, and then rinse with water.

Step 6: comb the hair ends by hand, apply conditioner to the hair ends, gently rub and massage, and then rinse thoroughly, remember not to touch the scalp.

Step 7: Because hair is the most fragile when it is wet, it will break or knot if it is rubbed hard. So after washing your hair, it's best to wrap it in a towel and suck it dry first, comb it all forward with a wide-toothed comb and blow it dry with a hair dryer, so that it won't burn. But when blowing hair, the mouth of the hair dryer should be away from the hair 15 cm, otherwise the hair will be excessively dry.

The second step of the shampoo process is the correct shampoo method.

1, comb your hair before washing your hair.

Before shampooing, all knotted hair should be combed flat, which is more conducive to cleaning up the dirt on the scalp and hair during shampooing. At the same time, combing hair is also a kind of head massage. Sticking to a certain amount of combing hair every day can keep the scalp soft, relieve scalp fatigue, prevent scalp health problems, and then reduce hair loss and promote the health of scalp and hair.

2. Pre-clean with clear water first.

Many people put shampoo on their hair when it gets wet and start rubbing it. In fact, it is better to wash it with water for 2-3 minutes after it is wet, which helps to wash off the dust attached to the hair first, and then it is better to wash it with shampoo.

3. Disperse shampoo.

When washing your hair, washing your hair is not the fundamental purpose, but washing your scalp is the original purpose. Therefore, when you wash your hair, you may wish to spread the shampoo, preferably directly on the scalp, and foam it.

4. Pay more attention to scalp massage when washing your hair.

Many people scratch their scalp when washing their hair, and it is easy for nails to hurt their scalp. So when cleaning your hair, don't scratch your scalp with your nails, but massage your scalp with your fingertips. Shampooing is mainly about massaging the scalp, and shampooing is only secondary. Massage the scalp can promote blood circulation and promote hair growth. Shampoo and massage for five minutes at a time. In the process of massage, it is best to massage from bottom to top in the order of hairline-top of head-side head-back of head.

Step 5 rinse for another two minutes

When cleaning hair, in order to clean shampoo, you may wish to rinse it for two more minutes, especially in places where shampoo is easy to accumulate, such as hairline and behind ears, and pay more attention to cleaning.

6. The conditioner should be rubbed in the palm of your hand and then applied to your hair.

When using conditioner after shampooing, don't pour conditioner directly on the hair, first pour it on the palm of your hand and rub it, then apply conditioner from the most easily damaged hair tip, and then slowly apply it to other parts of the hair.

7, let stand for 2-3 minutes and then clean.

Don't rinse immediately after applying the conditioner, let it stand for 2-3 minutes to let the effective ingredients in the conditioner enter the hair, so as to better care for the hair.

8. The air conditioner should also be cleaned.

In the process of cleaning, both conditioner and shampoo should be cleaned. Don't think that it is good to leave a little on your hair.

9. Apply a little conditioner before blowing your hair.

Before blowing hair, apply some moisturizing conditioner, and then blow dry the hair with hot air, which can prevent the hair from being damaged and dried by hot air due to the loss of water in the hair, and also protect the hair from the stimulation of external environment such as ultraviolet rays and moisture.

The third step in the process of shampooing is the correct method of shampooing.

Step 1: add water (the temperature is appropriate)

It is best to wash your hair with warm water, not too hot or too bright, which is not good at all. Cold water, hot water and a pot. This is suitable for the scalp and good for the skin of the head. Prevent burns and cold water irritation.

Step 2: Prepare.

A lot of shampoo, hot water and cold water (one basin is not enough) and towels must be prepared, and tools such as combs can be prepared to help shampoo.

Step 3: Moisten your hair.

Then you can officially wash your hair. The first thing to do when washing your hair is to moisturize it. This hair must be thoroughly moistened, not wet, and then shampooed. This is easy to leave shampoo and cream, which is not good for hair and scalp. It is best to moisten the hair and let the scalp have an adaptation process to adapt to the next shampoo.

Step 4: Rub the shampoo in your palm until it bubbles.

Don't put shampoo directly on your head, just rub it on your head. The correct way is to squeeze the shampoo into the palm of your hand first, and then rub it with your hands until the cream shampoo is foamed and can be directly applied to your head.

Step 5: Rub your hair.

Knead, the strength should be appropriate, not too fast and too hard, which are all bad behaviors. It's best to take your time. Massage with appropriate intensity is actually equivalent to a kind of physical therapy, just massaging your head.

Step 6: rinse with clean water.

After wiping, you can rinse with clean water. One side is not enough, at least two pots of water are needed. So it's best to wash most of it the first time, so that the second time will be more thorough.

Step 7: Change water to continue washing or wash for the second time.

Changing water to continue washing is to change a basin, wash it well and let the residual shampoo and dirt wash off. The second washing means that if you feel that your hair is still dirty, repeat the above steps and wash it for the second time with less shampoo. Next, rinse with clear water.

Step 8: Dry your hair with a towel.

Wet hair must be wiped, and it is best to dry it. Summer is no big deal. If it is autumn and winter, if you go out without drying your hair, you will catch a cold when the cold wind blows. So dry your wet hair with a towel.

Step 9: Dry your hair and tidy up your things.

Even if you wipe it with a towel, there must be residual moisture, so be sure to wait until your hair is completely dry before going out. If it is too slow, you can dry it with tools such as a hair dryer, which can speed up the drying.