Traditional Culture Encyclopedia - Hotel accommodation - Introduction to matters needing attention when installing Adil door locks
Introduction to matters needing attention when installing Adil door locks
When we change door locks, we will inevitably choose extremely safe anti-theft door locks. So what is "good"? It is not just decoration. The so-called good means safety first. Good looking second. Adhering to the trend, Adil door locks are sold throughout China and strive to make their products the best so that every user can experience the different feeling of Adil door locks. However, the types of door locks are also extremely different, such as hotel door locks, apartment door locks, smart door locks, fingerprint door locks, etc. How to install Adil door lock?
As for the installation height of Adil door locks, there are actually a lot of things to pay attention to. Many consumers may not be worthy of it. There are very standard regulations for this height, and the relevant national regulations are generally The installation height of the room Adil door lock should be about 90-105 cm from the lower net. This is a national regulation on the height of ordinary Adil door locks, and many door manufacturers also comply with such a specification.
For conjoined Adil door locks, the general regulations on the installation height of Adil door locks should also be followed. However, there are several issues that need to be paid attention to during installation. One is that there are certain requirements for Adil door lock products. To protect it in place, it is best not to use hard objects to knock it to avoid damage to the internal structure. Secondly, you must strictly follow the steps for installation, and you must read the operating instructions carefully. After all, different products have different installation methods.
? Installation steps
In fact, it is also very important for the Adil door lock in the bathroom. After the installation height of the Adil door lock is determined, the issue that needs attention is to install it according to the relevant instructions. , strict operating procedures. At the same time, for the Adil door lock in the bathroom, the issue that needs to be paid attention to is timely maintenance, including reinforcing screws, adding lubricant, etc. Of course, when installing, it is best to keep the distance from the door frame. some distance.
1. Installation of one-piece Adil door lock:
Do not use iron, hard objects or sharp objects to hit the surface of Adil door lock products.
2. Installation of split-type Adil door lock:
When opening the door, the key should be turned in place or the handle should be turned in place to make the lock tongue completely withdrawn before using the handle to open the door. Do not use the handle to open the door. Directly using the key inserted in the lock cylinder to push the door open will reduce the life of the lock.
3. Bathroom Adil door lock installation:
It is recommended to inspect and maintain the Adil door lock once every six months, including: reinforcing the screws and wiping some positions that are not usually touched, and adding an appropriate amount of water to the rotating positions. Lubricant, add an appropriate amount of pencil powder or graphite powder to the lock core slot to ensure smooth insertion and removal of the key. Check the matching gap between the lock body and the lock plate. The gap between the door and the door frame is preferably 1.5-2.5mm. If there are any changes, make appropriate adjustments.
4. Installation of Adil lock plate:
When cleaning the surface of Adil door lock, use clean water or neutral detergent and wipe it with a soft cloth. Do not use corrosive cleaning agents or Rigid cleaning materials.
Maintenance of door locks
Lubricant
Some friends often like to drop lubricant into the keyhole when the door lock becomes astringent or tight. Apply some lubricating oil, and the door lock may be smooth immediately. However, because the oil is easy to stick to dust, dust will slowly accumulate in the keyhole in the future, forming greasy putty. This will make the door lock more likely to malfunction. .
The correct solution: sharpen some pencil crumbs or some candle crumbs, blow them into the lock core through a thin tube, then insert the key and turn it several times.
The door does not open smoothly
Sometimes, due to the gravity of the door leaf or the door hinge, the door leaf sinks, causing the door to lock or open unsmoothly. At this time, it is often very difficult to open and lock the door with a key. At this time, do not forcefully twist the key to avoid breaking the key and causing more trouble.
Correct solution: Check the cause first. If the door leaf sinks due to loose hinges, tighten the loose hinges with screws. If the door frame is deformed or irreversible due to other reasons, you can start from the door frame and expand the lock tongue accordingly, so that the door lock and door can return to normal smoothness.
Substation
The anti-theft door lock of the substation is in accordance with the "General Technical Conditions for Anti-theft Security Doors" promulgated by the state and the Ministry of Public Security's "Mechanical Anti-theft Locks" to determine whether the mechanical lock matching the anti-theft door is qualified. It is judged from three aspects: the anti-destructive opening time; the anti-technical opening time; and the mutual opening rate between anti-theft locks of the same brand and specifications. There are two general anti-theft door locks, divided into Class A and Class B. Class A anti-theft locks must be qualified if the destructive opening time is no less than 15 minutes and the technical anti-theft lock time is no less than 1 minute. The anti-destructive opening time of Class B anti-theft locks is 30 minutes, and the anti-technical opening time is not less than 5 minutes. Judging from the situation, Class B anti-theft locks are the highest protection level in the GA/T73 "Mechanical Anti-theft Locks" of the Ministry of Public Security.
Adil door locks also have technical classifications, such as spherical door locks, three-lever handle locks, mortise handle locks and glass door locks, each of which has its own unique technical characteristics. . If you want to ensure that the Adil door lock does not break down for a long time, you must maintain it. Buying lubricants can eliminate the difficulty of opening the door. Maintenance of the substation is also very important. According to the current situation of the market, the maintenance standards for door locks are also different. Warm reminder, never force the lock to open! The above is the content about the installation of Adil door lock. I hope it can be helpful to everyone!
Tubatu provides you with "each decoration quotation, 1-4 local decoration companies, 3 sets of decoration design plans" for free online, as well as decoration avoidance strategies! Click this link:/yezhu/zxbj-cszy.php?to8to_from=seo_zhidao_m_jiare&wb, and you can get it for free~
- Related articles
- How many stars are there in Wuhan Sanwu Hotel?
- Guiyang Tourism
- What are the talented women in the mural history of Grand Hyatt Shanghai?
- How much is the dinner charge at Hilton Shaoguan Hotel?
- How much is the house price in Zhuhai Aviation New City? Is it worth buying?
- Where can I find wholesale tables and bowls in Xi 'an?
- Is Toxoplasma fischeri easy to fry its nest?
- Jiji hotel telephone
- I want to know: How to get to Guo Mao Blue Ocean Hotel in Haining by bus from Pinghu South Station or Jiaxing North Station?
- The taxi fare in Japan is so high, will delivery be higher?