Installation height of corridor lights

Installation height of corridor lights

After installing the wall lamp, home life will be more romantic and warm, but the beauty of things has a great relationship with its location. When installing the corridor wall lamp, it is more appropriate to control the height as much as possible at about 2.2-2.6 meters. This height also meets its purpose. If it is installed in an aisle, its lighting range must be wide. Increasing the height of the corridor wall lamp can appropriately increase its lighting range.

Matters needing attention when installing lamps and lanterns:

1. When installing lamps and lanterns in masonry structure, hooks, bolts, nylon plugs or plastic plugs can be embedded for fixing, and wooden wedges are prohibited. When the design is not specified, the bearing capacity of lamps and lanterns should match the weight of electric lighting devices.

2. How to connect the lamp power supply to the terminal? If the electrical contact is poor, it can be wrapped with vinyl cloth and then kept at a certain distance. If possible, try not to measure the terminal under the same piece of metal to avoid short circuit danger.

3. For dangerous or dangerous places, when the height of lamps from the ground is less than 2.4m, lighting lamps with rated voltage of 36V and below can be used. In substation, lamps and lanterns should not be installed directly above high and low voltage distribution equipment and buses.

Outdoor installation of lamps and lanterns, the height from the ground should not be less than 3 meters, if installed on the wall, the height from the ground should not be less than 2.5 meters.