Futian pilotage s 1.6 configuration parameters

Pilot S 1 can be equipped with 1.6L engine, horsepower 120Ps, torque 158N.m, and equipped with DAT 18R gearbox.

The length of the pilot S 1 cargo hold covers 2.7~4.22 meters, and the maximum cargo hold length is the same as that of a light truck. The width of the cargo hold can reach 1.85 m, which is 20~30 cm wider than the common small cards and micro cards in the market, so it is not a problem to throw the goods lightly. Taking the moving market as an example, the traditional pickup trucks are often difficult to compete with light trucks because of their size, while the pilot S 1 can easily accommodate large furniture such as sofas and beds, which can perfectly replace the moving demand that only light trucks can do. There is a lot of space, and at the same time, you must have a good figure, otherwise the cargo hold is just a flower stand. Pilot S 1 adopt integral straight-through girder design, and the key parts are reinforced with double-layer steel plates. The belly height of the longitudinal beam is 140/ 160 mm. Compared with the common dovetail beam, the straight-through beam has better rigidity, strength and bearing capacity. At the same time, the pilot S 1 vehicle is matched with high-strength three-level gradient stiffness leaf springs. The width of leaf springs is 70mm, the stiffness of leaf springs is increased by 70%~80%, the strength is high, the number of leaf springs is small, and the friction between springs is small, which can not only reduce the weight, but also ensure sufficient bearing capacity. In addition, with Baosteel B6 10L high-strength material frame and reinforced rear axle, the bearing capacity is further improved, and the ant elephant lightweight technology platform is blessed, which perfectly solves the industry problem of compliance+high bearing capacity.