Traditional Culture Encyclopedia - Hotel accommodation - Excuse me, what are the nursing methods of stone crystal face? Does anyone know that you can talk about it?

Excuse me, what are the nursing methods of stone crystal face? Does anyone know that you can talk about it?

With the improvement of people's living standards, the requirements for materials are getting higher and higher. Stone is also an indispensable material in our decoration. The stone industry is also advancing with the times. With the approaching of high-quality life, there are many kinds of stone, which makes the use of slow stone in decoration more and more common. So what are the methods of stone crystal facial care? Here are some introductions for your reference.

Stone crystal face care is a scientific cleaning process, aiming at creating permanent beauty and protection for marble, granite and general stones. Crystal surface treatment is a widely used stone care technology in Europe and America. The crystal hard protection technology of stone was introduced to Chinese mainland from Western Europe in the early 1990s, and its exquisite and unique scientific and technological effects have been well received, and it has been adopted by many star-rated hotels, banks, senior clubs, office buildings, shopping malls, apartments and even families. The technological principle of crystal face care is to use crystal face care agent and crystal face processor to generate heat and chemical reaction on the stone surface, and form a hard crystal face protection layer on the stone surface, so that the stone surface is not easy to be damaged and contaminated, and the effect of simultaneous repair and maintenance can be achieved.

A, marble crystal hard processing

1. Tools: German KARCHER multifunctional cleaning machine, vacuum cleaner, 3M red cleaning pad and 3M white polishing pad.

2. Drugs: K2 and K3 crystal water, stone curing agent and neutral cleaner imported from Spain.

3. Step: Sprinkle marble crystal water on the ground with a cleaning machine with a red cleaning pad and smear the same amount of water to start polishing. Brush should be polished horizontally, back and forth about 10- 15 times. The greater the mechanical torque during operation, the better the effect. Put a natural fiber mat, spray a small amount of "stone maintenance agent" and polish it again. The purpose of this process is to increase the hardness of the crystal face, and the whole maintenance project has been completed. The whole marble surface has been as smooth as new, with a gloss of 90 degrees.

4. Precautions: Do daily cleaning work according to different needs every day, remove dust regularly and keep the stone surface clean. Please don't polish with a black waxing pad. When cleaning, use red and white cleaning pads and avoid using floor brushes. Because the pressure and hardness of the floor brush are irregular, it is easy to wear the ground, so it can be pushed for dust removal and maintenance.

Second, granite crystal surface treatment

1. Tools: German KARCHER multifunctional cleaning machine, water suction and dust suction machine, 3M stainless steel silk cotton pad.

2. Drugs: American Johnson stone crystal hard powder and stone maintenance agent.

3. Step: Mix one part of hard crystal powder and one part of stone curing agent, then coat them on the ground, and polish them with stainless steel silk cotton pad and mechanical pad until the mixture is dry and firm. The scope of crystal hard treatment should not be too large at a time, and it is best not to exceed 2 square meters. Always check whether the stainless steel silk cotton pad is filled with too much mixture, replace it in time, and finally clean it up. Then put a clean stainless steel wire pad, spray a small amount of jet grinding crystal hardener, and grind again. The whole maintenance process is completed here. The gloss of the treated stone is above 80 degrees.

The above related matters about stone crystal face care are introduced here. Here's a friendly reminder: if the gloss of different types of building materials is not ideal for the first time, they can be polished for the second time.

Each polishing area is about 2-3 square meters. If the pattern with wear marks is found after polishing, it can be polished again with 202 until the pattern disappears completely.