How to clean all kinds of dirt and water stains on the surface of toilet washbasin, bathtub and shower nozzle?

1. Cleaning of dirt and scale in bathroom

Pour the detergent on the sponge and clean the washbasin, bathtub and shower mat. Note: the shower mat made of glass fiber should be cleaned by spray, and the shower mat made of acrylic fiber should be gently wiped with plant fiber sponge. Paraffin, turpentine or petroleum solvent can be used to remove the scale on enamel or ceramic bathtub. Rinse with hot detergent solution 1 time after wiping, and dry. Immerse the faucet in a small container filled with white vinegar or detergent, and then scrub their surfaces with a towel or wool rope to remove the dirt on the faucet. Note: When using the scale remover, you must first try it on a small piece of scale according to the requirements of the manual, and never exceed the service time marked in the manual to prevent corrosion of the faucet surface.

2. Clean fiberglass bathtubs and shower heads.

When cleaning this kind of bathtub and shower head, use detergent or general liquid cleaner, but be careful not to use abrasive cleaner, because abrasive cleaner will wear the bathtub and change the color of shower head; If you want to clean the inside of the nozzle, you need to remove the nozzle first, and use an old toothbrush or thick needle to remove the blockage in the nozzle hole, so that the water can return to normal.

3. Clean ceramic bathtubs and washbasins.

Spray some detergent on the bathtub or washbasin, and then scrub it with a rag 1 time, and the original smoothness of the bathtub and washbasin can be restored. Note: No matter what the bathtub and washbasin are made of, do not brush them with vegetable cloth, hard brush or detergent powder to avoid damaging their surfaces.

Clean floor tiles

The humidity in the bathroom is high, which is easy to breed plaque in the cracks of floor tiles. However, if some mildew remover is sprayed on it regularly, it can achieve the effects of mildew prevention, scale removal and sterilization.

5. Bathroom wall cleaning

1: 4 White vinegar and aqueous solution can be used to clean the soap bubbles on the bathroom wall, and then rinse them with clean water. When cleaning the gray ceramic tile in the bathroom, dip an old toothbrush into a proper amount of bleach and water (the ratio is 1: 6) to scrub it, and then rinse it with clean water.