The Digil lock cylinder will not eject.

There are two ways to solve the problem that the lock core won't pop out. The following is the solution that the lock core of the door handle can't bounce out:

1, remove the cover:

Find two screws on the back panel of the door and unscrew them with a screwdriver, so that the front and rear panels can be removed. At the back, there are two small screws at the lock core, so that the two small covers of the lock core can be removed.

2. Remove the lock cylinder:

On the side of the door, that is, the side of the lock tongue, there should be a screw parallel to the lock core under the fixed lock tongue. After unscrewing, the lock core can be taken out.

Here's how to choose a quality door lock:

1, depending on the complexity of key design:

The key has a lot of teeth, and the arrangement design is not simple compared with other keys, so the anti-theft ability of the door lock will be better.

2. See if the door lock is convenient to use:

You can use the key to test whether the door lock switch is flexible. If it is a smart door lock, you can swipe your card to see if the smart door lock responds flexibly.