TP-Link 3G Wireless Router Internet Settings Tutorial

The configuration of TP-Link 3G wireless router is simple, but for users without network foundation, it is still difficult to complete the installation of the router and configure the Internet parameters. In this article, I will mainly introduce the TP-Link 3G wireless router. Router's Internet Settings Tutorial! TP-Link 3G Wireless Router's Internet Settings Tutorial

1. ?3G Mode?

The 3G network to wireless Wi-Fi is the TP-Link 3G wireless router The basic function is that after connecting to a 3G wireless network card, the 3G network can be converted into a wireless WIFI signal, allowing mobile phones, laptops, tablets and other wireless terminals to enjoy the Internet, as shown in the figure below.

TL-MR12U router 3G Internet topology

2. Wireless routing mode (Router)?

TP-Link 3G can also be used like an ordinary wireless router. Connect to broadband to access the Internet; you can connect to ADSL Moden, optical modem or the home network cable provided by the broadband operator to achieve the same broadband line with multiple wireless terminals enjoying the Internet, as shown in the figure below.

TL-MR12U router connected to broadband Internet topology

3. Access point mode (Access Point)?

In some hotels, offices, guesthouses and other places , many times a network cable is provided, but there is no wireless network; if you need to use a wireless WIFI network, you can connect the TL-MR12U router to the original network, convert the wired network to a wireless network, and provide wireless hotspot signals.

TP-Link TL-MR12U router AP mode Internet topology diagram

IV. Repeater mode (Repeater) and Bridge mode (Bridge)?

If there is already a wireless router that provides a wireless WIFI signal, but due to the large area of ??the site, the signal is weak in some areas, or the signal cannot be received, you need to increase the strength of the wireless signal and expand the coverage of the wireless signal. Then you can configure the TP-Link TL-MR12U router into "Repeater" or "Bridge" mode to relay and amplify the original wireless signal.

The difference between Repeater mode and Bridge mode: The amplified wireless WIFI signal in Repeater mode is the same as the original one; but in Bridge mode ( Bridge)? The amplified wireless signal is different from the original one.

TL-MR12U router relay amplified signal topology

5. Client mode (Client)?

If there is a wireless router in the place that provides wireless WIFI signal, and the desktop computer also wants to connect to wireless Internet, but it does not have a USB wireless network card. Then you can configure the TP-Link 3G router in Client mode. This is the TL-MR12U router equivalent to a wireless network card, allowing desktop computers to connect to wireless networks to access the Internet.

TL-MR12U router client mode (Client) mode topology!

?