How to install the water purifier, how to install the water purifier.

The installation method of the water purifier is as follows:

1. The main machine is connected with the filter element for later use.

2. Install the RO membrane and tighten each joint and filter bottle with a suitable wrench.

3. Install the RO membrane and tighten each joint and filter bottle with a suitable wrench. Don't rotate too tightly, it will crack easily.

4. Install the faucet in the proper position of the water tank, then put the washer in the spindle of the faucet head, and put the faucet at the perforation of the water tank and fix it.

5. Fix the faucet, and then insert 2 branches into the connection port with the faucet.

6. Cut appropriate water pipes and connect raw water, pure water, pressure barrel and waste water pipes respectively.

7. Close the main inlet valve and install the inlet tee and 2-point ball valve.

8. Connect the main engine to the pressure barrel first, then connect the main engine to the water inlet, cut a section of pipe with appropriate length to connect to the wastewater outlet, and connect the other end to the sewer, and then fix the wastewater pipe with a tie.

9. Straighten out the connected water pipes and tie them tightly with tie straps.

Precautions for use of water purifier:

1. After each use of the water purifier, the filter element of the ultrafiltration membrane should be kept wet. If it is dry, water should be added in time to improve it, because it will lead to a sharp drop in water production.

2. The water purifier has not been used for three consecutive days. When it is used again, it should be cleaned first, and it is best to rinse it repeatedly for two or three times, and then discharge the remaining water for reuse to ensure the safety of water use and drink healthy water.

3. If the tap water is cut off, the remaining water should be discharged and reused, and the sediment and rust in the water pipe should also be discharged and reused.

4. The water output of water purifier is closely related to the water quality. If the water quality is good, the water output will increase, whereas if the water quality is poor, the water output will decrease. Therefore, the water quality is detected according to the water output.

5. When the water purifier is in use, frequent cleaning can effectively prolong the service life, so don't forget to clean the water purifier.

6. If you don't use the water purifier for a long time, keep it well and don't let the dirt stay in it for too long, so as not to affect the water quality when you use it in the future.