Traditional Culture Encyclopedia - Hotel accommodation - Installation method of folding door

Installation method of folding door

Folding doors are loved by many consumers because of their beauty and space saving, but many people are worried about buying folding doors but don't know how to install them. Next, Bian Xiao will introduce you to the installation method of folding doors.

find

Before installation, we must first determine the position of the folding door. If you want to make a kitchen door or a bathroom door, you need to install it in the middle of the door frame. If it is used as the partition of the living room, we need to set aside corresponding space, then determine the position, and finally measure the straight line length to confirm whether the length of the track is correct.

Fixed; unchangeable

Confirm the orientation of the handle before fixing. It is suggested to choose the corresponding direction according to your own habits. After confirmation, start to install the track, and install it in the order of middle first and then sides. Screw screws into rails, doorframes or walls with an impact drill.

Press in rubber sleeve

Open the folding door, compare the position of the magnet on the door, and determine the position where the magnet is installed on the wall or door frame. After determining the position of each iron plate, punch a hole with an impact drill, about four centimeters deep, then drive the rubber sleeve into the hole, and then drive the rubber sleeve in turn.

Fixed sucker

Step 1: Push the folding door to the middle again, pick up the suction iron plate, align the hole on it with the hole center of the rubber sleeve, and screw the screw into the rubber sleeve with a screwdriver until the suction iron plate is fixed. Then use the same steps to fix each suction iron plate, then open the folding door, and use the suction iron plate to suck the side without the handle, thus installing the folding door.