Traditional Culture Encyclopedia - Hotel accommodation - Can the fingerprint lock be installed by itself?

Can the fingerprint lock be installed by itself?

Can the fingerprint lock be installed by itself?

Can the fingerprint lock be installed by itself? Fingerprint lock is an intelligent lock with human fingerprint as the identification carrier and means. It is the perfect crystallization of computer information technology, electronic technology, mechanical technology and modern hardware technology. So, can the fingerprint lock be installed by itself?

Can the fingerprint lock be installed by itself? 1 If you have strong hands-on ability and early installation experience, you can of course install it yourself, which can save a sum of money.

Installation requirements of fingerprint lock door lock

When installing the fingerprint lock, the thickness of the door should be 40 mm ~ 120 mm, generally iron gate, wooden door, steel wooden door and copper door. If the door has lace, the distance from the lace of the door to the door edge must be greater than100 mm.

Common installation tools

1, common tools for metal door installation:

Electric drill, alloy drill 3.5MM, drill bit 10MM, metal hole opener, pliers, patch panel, square ruler, tape measure, screwdriver, marker pen, file, tap, riveting gun, rivet, steel plate cutting tool (commonly hand-held angle grinder), welding equipment, etc.

2. Common tools for wooden door installation:

Electric drill, drill bit 10MM, hole opener, pliers, patch panel, square ruler, tape measure, screwdriver, marker pen, file, chisel, hammer, medium-sized cutter, etc.

How to set fingerprints on fingerprint lock?

(1) Fingerprint lock can be opened in the following three ways.

1, job number+password

2, direct credit card

3. Pure fingerprints

Fingerprint lock has many ways to open the door. The purpose of this setting is to increase the convenience of opening the door.

(2) The fingerprint lock is opened by adding a user/swiping card or using a job number+password.

Press Yes to enter the system management state → enter the administrator password (default 123456) → select 1 to enter Add User → enter the work number/swipe card → press Yes, and the system will confirm the work number → press No to register the fingerprint → set the password, and the password will take effect after pressing Yes. In the future, the default is to open the door with a password → register successfully → wait for the next person.

How to choose a fingerprint lock

Standard 1: Is there ANSI certification?

Fingerprint locks were really introduced to China from the United States in 2005. A reliable fingerprint lock must pass the highest quality grade in the United States-ANSI certification.

As the highest and strictest quality certification in the world, ANSI certification is the guarantee and symbol of high-quality products. This kind of certification requires a unified standard, technology and interpretation by strictly testing the operation, life, strength, safety, surface and materials of products, so as to achieve a consistent understanding of standards and technical requirements, improve the core competitiveness of products and give buyers the greatest trust.

Standard 2: Is there a safety design?

As a high-tech product of door lock security, fingerprint lock can not only protect family property, but also reassure family members. Especially in today's society, some contradictions still exist, so it is very important to have a comprehensive design of fingerprint lock.

The fingerprint lock with high safety performance perfectly combines traditional mechanical technology with modern high-tech fingerprint identification technology, and has a 360-degree patented design of anti-theft, riot prevention, waterproof, fireproof, moisture-proof, corrosion-proof, temperature-proof, shock-proof, wear-resistant, rain-proof and sun-proof. The structure is made of pure stainless steel to achieve the highest safety.

Standard 3: Is there a locking function after closing the door?

In our daily life, we often forget to lock the door when we close the door, especially the vulnerable groups (such as the elderly or children) forget to lock the door when they open and close the door, which will leave a hidden danger of burglary.

When choosing a fingerprint lock, be sure to know whether the fingerprint lock has the function of locking after closing the door, so as to put an end to this safe future trouble and make it safer to use.

Standard 4: Is there perfect after-sales service?

According to the observation of professionals in the industry, the sales service point network of fingerprint lock manufacturers is generally small, and there is no after-sales service point, and the after-sales service commitment is useless.

When buying a fingerprint lock, you must know whether the fingerprint lock brand has a national after-sales service point, whether it is convenient for users to open a unified national free after-sales service hotline, and promise to solve the problem 24 hours a day.

Can the fingerprint lock be installed by itself? 2 How to choose a fingerprint lock?

Look at the appearance. Fingerprint locks made of plastic materials generally have smooth surfaces and bright colors, zinc alloys are slightly rough and sub-colored, and stainless steel is the roughest and sub-colored. Knock: If it is difficult to "see" the fingerprint lock material, we can use "knock" to judge.

Tap gently on the side of the lock body with your fingers. If the sound is unclear or hollow, it is usually plastic. The stainless steel fingerprint lock has a sharp and concentrated sound when striking, with better penetration. However, although zinc alloy is not as sharp as stainless steel, it is much cleaner than plastic products. Weighing: There are still some differences between plastic locks and zinc alloys or stainless steel. Just weigh them.

Firstly, the response speed and accuracy of fingerprint unlocking are tested. The higher the resolution, the more accurate the identification, the faster the response and the better the security. Ask the clerk to input your fingerprint first. When recording fingerprints, observe the difficulty of the clerk entering fingerprints. If a fingerprint cannot be recognized many times, it can almost be judged that the resolution of fingerprint lock is not high.

After inputting the fingerprint, randomly test the recognition and response speed of the fingerprint lock to the correct fingerprint. When the command is turned on, its response speed is fast, otherwise it is slow. The faster the reaction speed, the higher the resolution and the better the performance of the lock. Similarly, if we can quickly identify the true and false fingerprints, then its accuracy is good, and vice versa. It's best to try several times when testing. Only by trying several times can we better distinguish its advantages and disadvantages.

Look at the material: the material of the ferrule is the same as the shell, which is divided into three types: plastic, alloy and stainless steel. Generally, the inside of the ferrule is made of stainless steel, but the ferrule shell is made of alloy or plastic, which is not only weak in violence resistance, but also weak in fire prevention, which is not conducive to safety. Look at the lock points: the lock points of fingerprint lock inserts are mainly divided into single tongue and multiple lock points. The safety of single-tongue lock core is worse than that of multi-lock point, and the anti-pick and anti-explosion performance is also poor.

Look at the function: the card sets on the market now are generally divided into hotel lock card sets, lifting card sets, wide tongue automatic pop-up card sets and multi-lock self-elastic card sets. Hotel lock core can be pried open with a card, which has poor safety performance;

When using the lifting insert, it is necessary to lift the handle to lock the door when closing the door, which is easy to make people forget to lock it, which is not in line with the consumer's usage habits; The square tongue automatically pops out the ferrule, which solves the shortcoming of lifting the ferrule, but it still can't automatically control the celestial pole; As the fourth generation lock body, the multi-lock self-elastic sleeve is the most superior sleeve so far, with the strongest anti-theft function and the most convenient use.

Can the fingerprint lock be installed by itself? 3. Matters needing attention in choosing fingerprint lock.

1, pay attention to the appearance panel material. As a family security door lock, it not only protects family property, but also makes family feel at ease. The role of materials is very important. The fingerprint lock with excellent performance combines modern mechanical technology and leading biometric fingerprint identification technology, and has multiple protection designs such as anti-theft, riot prevention, waterproof and anti-corrosion. The structure is made of pure stainless steel to achieve high security.

2. Pay attention to stability: it is a very important indicator of fingerprint lock, and it generally takes more than one year to be stable and stereotyped. Consumers try to choose the main manufacturers of fingerprint locks when purchasing. Such enterprises generally have good production experience. The experience of R&D is a reliable stabilizing factor.

3. Pay attention to the fingerprint lock brand. So far, there are very few fingerprint lock brands generally recognized in China, which are all promoted by fingerprint lock enterprises themselves. Many fingerprint lock brands have been established in recent years. Because of the time, it needs the unremitting efforts of the fingerprint lock industry to establish a domestic brand in a short time.

4. Pay attention to the lock core of fingerprint lock. No matter how good the fingerprint lock is, it is still inseparable from the lock core. Powerful fingerprint lock manufacturers will choose high-grade lock cores, so that the quality of products will be guaranteed. Obviously, especially consumers can look at the number of marbles and the number of depth files of the key. Try to choose products with many marbles and deep files.

How to choose a fingerprint lock

Fingerprint lock is an intelligent lock with human fingerprint as the identification carrier and means. It is the perfect crystallization of computer information technology, electronic technology, mechanical technology and modern hardware technology. Fingerprint lock is generally composed of electronic identification control and mechanical linkage system.

Fingerprint lock is a very good product with strong practicability and high security. Don't worry about forgetting or losing your keys, and you won't be unable to enter the house because of key problems. At the same time, it only has the functions of instant information push, anti-pry alarm, anti-stress alarm and low battery reminder. When buying a fingerprint lock, you can ask the merchant to show the quality inspection certificate of the product or the g a safety certificate of the Public Security Bureau. These certificates will only be issued after comprehensive testing by authoritative organizations, which will be relatively more secure.