The correct process for land reclamation and cleaning

The correct process for land reclamation cleaning

Cleaning process: after the hard decoration is completed and before large pieces of furniture are brought into the site - basic cleaning - ceiling dust removal - lamps and air conditioning blades - exterior glass cleaning - cabinets Cleaning - sockets, electrical boxes, main gates - door frames, baseboards - wooden floors, tile floors.

1. Precautions for land reclamation and cleaning

1. Use a feather duster to sweep the top of the wall.

2. Wipe the lamps with a dust-free rag.

3. Do not use steel wool on window frames, marble, glass, or cabinet doors. It is best not to use it anywhere.

4. Don’t hit the wall when moving things, don’t hold the wall with wet hands, and wipe the wall with a clean white rag.

5. Tear off the cabinet labels, remove the drawers, and wipe the inner and outer tracks.

6. Collect the remaining paint, screws, and wires and put them away.

7. Pour all dirty water into the toilet and do not pass through the floor drain. Clean the shower room and put a filter on the floor drain.

8. Remember not to tear off the explosion-proof film of the glass door.

2. Specific procedures for land reclamation and cleaning

1. Clean up construction waste and decoration waste

First of all, the construction and decoration waste left during on-site construction must be cleaned up , such as cement blocks, silica gel, etc.

2. Comprehensive dust removal

Then start using a high-power vacuum cleaner to completely remove dust from top to bottom. Some corners need to be cleaned manually.

3. Clean the glass

You can first use a wool wipe to dip the diluted glass solution, and apply it evenly from top to bottom on the glass, and apply it several times to the areas with serious stains; then Use a glass scraper to scrape it clean from top to bottom, then use a dry towel to wipe away the water marks left on the frame. Wipe the water marks on the glass clean with a machine leather. Vacuum and wipe the key areas of frame seams.

4. Clean the bathroom from top to bottom

Use a wet towel with detergent and wipe it from top to bottom, focusing on the dead corners left by land reclamation and cleaning, sanitary ware and stainless steel Pipe fittings, etc., and then wipe them all over with a dry towel.

5. Clean the kitchen

Use a wet towel to wipe it all over again, focusing on the floor and corners, kitchen utensils and various stainless steel pipe fittings, and finally dry it with a dry towel.

6. Clean bedrooms and halls

Use a vacuum cleaner to remove dust from the walls, and wipe lamps, switch boxes, smoke exhaust devices, air conditioning vents, etc.

7. Cleaning of doors and frames

Distinguish the material of the door, dilute it with professional detergent, and wipe it with a towel. The procedure is also from top to bottom. Fold the towel into a square and then wipe the top from left to right. If there are glue stains, you can use glue remover.

8. Floor cleaning

The ground should also be divided into materials, whether it is wooden floor, ceramic tile or stone. Start cleaning after diluting the detergent. Glue stains on the floor can be removed with a blade, and stubborn ones can be treated with glue remover.

9. Baseboards

Use a vacuum cleaner to clean the walls, and wipe the lamps, switch boxes, smoke exhaust devices, air conditioning vents, etc.

3. Timing of land reclamation and cleaning

1. After the primer is completed, before the whole house is customized and the wooden floor is installed: there will be a lot of dripping on the floor due to puttying and sanding. Putty spots and powder, if not cleaned in time, will be trapped under cabinets and floors. It is recommended to remove the putty spots at this time and use an industrial vacuum cleaner to completely suck up the dust.

2. After the hard decoration is completed and before the furniture is put in: At this time, all the dirt left during the hard decoration can be cleaned up without being missed due to the obstruction of the furniture. It is suitable for a thorough land reclamation. Cleaning, it is recommended to ask a cleaning lady to help with cleaning.

3. Before officially moving in: After ventilating for a period of time, a lot of dust will accumulate in the home. At this time, it is important to clean the dust and you can move in happily~

4. Different stains Treatment method

1. Mild stains on the paint surface: Nano-wiping gloves.

2. General stains on ceramic tiles: ceramic tile cleaner, nano-wipe, gloves.

3. Paint seal: turpentine, disposable rags, disposable gloves.

4. Offset printing: glue stain/adhesive remover, disposable rag, disposable gloves.