How to install the wall-mounted shower faucet in the hotel?

1. Before installation, please turn on the water source, remove impurities and sand in the pipeline, and then turn off the water source. The main purpose is to prevent the water pipe from supplying water normally when there are impurities after the faucet is installed, so it is quite troublesome to rework and install it again.

2. Lock the flange cover into the teeth of the water inlet elbow, then wrap the teeth with leak-proof tape, lock them into the wall pipe, adjust the rotation angle of the cold and hot water inlet elbow to be flush, and the hole spacing is the same as that of the body cold and hot water inlet holes, and then rotate the flange cover close to the wall, which is mainly used for fixing.

3. Insert the rubber washer into the main body cold and hot water inlet connecting nut, and then connect it with the cold and hot water inlet elbow and lock it. Please use a 30 mm wrench.