How to solve the problem of water leakage in shower nozzle

The way to solve the water leakage of sprinkler head is to repair the water leakage at the turning ball of sprinkler, replace the rubber ring of sprinkler and clean the sprinkler.

1. Repair the leakage at the steering ball of the shower head.

Unscrew the shower head from the steering ball ring, find out the internal O-ring or similar seal and replace it, then rotate the shower head back to its original position.

2. Replace the rubber ring of the shower head

Select the appropriate shower hose and faucet according to the specifications, replace its rubber ring and reinstall it. Unscrew the handle of the shower head from the hose with binding pliers. Clean the thread on the handle of the shower head, and apply special glue for water pipes or tie special adhesive tape for water pipes around it. Screw the shower head back and tighten it to remove excess adhesive and adhesive tape.

Step 3: Clean the shower head.

Unscrew the shower nozzle and clean it. If necessary, soak the parts in vinegar and scrub them. Be careful not to scratch them. If the shower head is adjustable, carefully check all moving parts for signs of excessive wear. If the rotary handle can't move smoothly, or the internal cam is broken, the whole shower needs to be replaced.

Selection skills of shower nozzle

1. When selecting, let the shower head tilt out of the water. If the amount of water discharged from the top spray hole is obviously small or not at all, it shows that the internal design of the shower is very general, and even if there are various drainage methods such as lashing and spraying, users may not get the corresponding pleasant experience.

2. Pay attention to whether the shower is easy to clean. The blockage of shower outlet is often caused by the accumulation of impurities in the net cover. If the shower nozzle is used for a long time, it is inevitable that there will be scale deposition. If it cannot be cleaned, some spray holes may be blocked. In order to avoid blocking the water outlet due to poor water quality, well-designed shower heads are often conspicuous and easy to clean, or the nozzle is made of silica gel, and the scale deposited on the nozzle can be brushed off with a rag or hand when cleaning.

3. Generally speaking, the brighter and more delicate the shower surface, the better the coating process. A good valve core is made of ceramics with extremely high hardness, which is smooth and wear-resistant and prevents leakage. Consumers must try to turn the switch by themselves. If you feel bad, you'd better not buy this shower.

4, shower accessories will directly affect the comfort of its use, but also need special attention. For example, whether the water pipe and lifting rod are flexible, how to use steel wire to resist bending of the hose of the shower, whether the joint of the shower is equipped with anti-twisting ball bearings, and whether the lifting rod is equipped with a rotation controller.