What should you pay attention to when making display cabinets? How to make a good display cabinet?

Showcase production, also called counter production, is the process of turning showcase design into products. The raw materials are made into display cabinets for shopping malls, specialty stores and other stores through showcase construction drawings and renderings. The production of display cabinets is also very particular. A successful display cabinet requires the following points: 1. Make full and reasonable use of the unique space. 2 Complete the practical function of displaying goods. 3. The appearance is beautiful and novel, attracting attention and giving people a good impression. 4Comply with merchant CI requirements. A perfect display cabinet must use "tempered" glass. This not only ensures the display effect, but also ensures that no one will be hurt if the glass is broken. The editor below will give you a detailed explanation of the key points and processes of display cabinet production.

1. Basic process of making display cabinets

Shenyang display cabinets take wooden cabinets as an example

1. Carpentry section: Determine the cabinet structure (effect Figure·Plan plan·Construction drawing):

A: Structure: Determine the size of the cabinet split structure

B: Material: 5cm, 9cm, 12cm, 15cm 3A grade high-density fiberboard

2. Determine the structure and material, and enter the cutting stage:

The cutting engineer uses a manual sliding table precision saw to separate different types of boards, and then Entering carpentry nailing requires smooth and graceful shape lines, tight nailing, and full glue in place.

　3. Paint section:

A. Material: 3C certified national standard paint: (PE white primer, yellowing-resistant and wear-resistant topcoat)

1) . Dust removal and polishing: First use putty to smooth out the nail holes, joint gaps and other depressions in the cabinet body. If the depression is too large, return it to the woodworking section for technical treatment; after the putty is dry, use pig blood ash to fill the batch. There must be no omissions in the cabinet. Then use 240# sandpaper to smooth the repaired putty and pig blood ash, and then apply sealing transparent primer. After the paint is dry, use 240# sandpaper to polish it to make the surface of the cabinet smooth and flat.

2). Primer: The entire cabinet is manually sprayed with PE white primer to isolate the cabinet from the outside world, prevent moisture, and avoid the phenomenon of "cabinet eating paint", which can ensure that the later finish is more shiny and bright. full.

3). Oil grinding: After the paint is dry, start sanding. Use 240# sandpaper to smooth the cabinet body, and then use 400#/600#

sandpaper to clean the surface. Marks

4) Topcoat: The exposed parts of the cabinet surface are sprayed manually with topcoat. The topcoat master has a good level of process operation. The paint room is guaranteed to be dust-free and isolated from the outside world. The cabinet has no sagging or particles. , the paint surface has uniform gloss and good hand feel.

4. Packaging: Check the paint quality of the cabinet, install hardware accessories, lamps and wires

A. Packaging materials: pearl cotton, bubble film bottom layer, external corner protectors, paper packaging , special cabinets are packed with wooden frames and wooden boxes.

Service Process

1. Regarding design drawings, the drawings are generally designed according to the customer’s VI standards and requirements. At the same time, the positioning and image of different shopping malls must also be taken into consideration for different designs. Design, Shenyang showcase manufacturer will also make a design process document based on the special measurement sheet to reflect the specific information one by one, so that the project can be better carried out, operated and implemented. The documents will be tracked by the Shenyang showcase all the time from the receipt of the measurement order to the project confirmation and ordering to the factory;

2. During the production process of the showcase, the mall has strict control over the production. There are also certain norms and requirements, and customers also need showcase production to comply with customer CI standards and positioning. At this time, both parties must strictly implement the confirmation, otherwise conflicts may easily arise. Under normal circumstances, the showcase manufacturer will fax the special measurement sheet to the customer. At this time, the customer will further communicate the specific requirements and information on the measurement sheet with the shopping mall to confirm that there will be no conflicts, so that the whole process will not Even if mistakes occur, the designed drawings will be recognized by shopping malls and customers;

3. The display cabinet factory will carry out construction according to the drawings and complete the work within the specified time;

4. Logistics Transportation, providing after-sales service.

2. Selection of materials for the production of display cabinets

Wood is indispensable in the production of display cabinets. Common display cabinet woods include: blockboard, multi-layer board, integrated board, high-density board, decorative board Panels and other various boards, the performance and role of these woods in the production of display cabinets will be introduced as follows:

Blockboard: good moisture-proof effect, cannot be painted directly

Blockboard In the middle is a core made of natural wood strips glued together, with thin veneers glued on both sides. It is one of the most important materials in the production of display cabinets. It can be used in central applications such as the facade structure of showcases, wooden doors and exterior structures. It has good waterproof performance and strong structural support. When choosing, you should look at the internal wood. It should not be too broken. Blockboards with gaps between the wood of about 3mm are suitable. Because the wood grain exposed on the surface is not beautiful, it is rarely painted directly, and veneer plywood is usually applied. Wooden structures such as showcases and decorations made of it must be bonded with density boards and then spray painted or bonded with fireproof boards to achieve good display effects.

Integrated board: not easy to deform

This is an emerging solid wood material, which is deeply processed from high-quality imported large-diameter logs, and the boards are interlaced and spliced ??like fingers. Due to different processes, this kind of board has superior environmental performance, being 1/8 of the allowable formaldehyde content of blockboard. On the other hand, this kind of board made of solid wood such as American spruce can be directly colored and painted, which saves one process compared to blockboard.

Medium-density board: good flatness

Medium-density board is made of wooden powdered sawdust after being pressed. It has good flatness, but poor moisture resistance. In contrast, density board has poor nail-holding power, and the screws are easy to loosen after tightening. Since density board is not strong enough, it is difficult to fix, so it is rarely used to make cabinets and is mostly used for pasting on the surface of baking display cabinets.

Face plywood: rich wood texture

Also called plywood and plywood. Different names are different depending on the number of layers. Its quality mainly depends on the raw materials and wood species, such as maple plywood. , the grain is clear and generous; the oak plywood has straight grains and is organized. This material is used in the display cabinet manufacturing with open paint treatment, and the effect is more high-end. Usually, the wood grain effect used in the production of display cabinets is mainly veneer plywood, that is, very thin solid wood veneer is pasted on the plywood in the factory. The facing plywood is easy to use and affordable.

Experts in the production of display cabinets from Skilled Craftsmen: When buying wood, you must first check whether it is environmentally friendly. According to regulations, the formaldehyde emission of wood used for shopping mall decoration must be less than or equal to 1.5 mg per liter. If it exceeds 5 mg per liter, Milligrams are substandard. Secondly, we need to look at the moisture content of the wood. When the moisture content of the wood is higher than the equilibrium moisture content of the environment, the wood will shrink monotonically, otherwise it will absorb moisture and shrink. The main reason for wood dryness, cracking and deformation is that the moisture content is too high or too low. Finally, when purchasing, don’t just look for low prices. Materials sold at low prices are usually shoddy and have serious excess formaldehyde. You should buy them in the regular market, and it is best to buy branded materials.

3. Design principles of display cabinets

Reduce the specifications and quantity of standardized combination parts to the minimum, so as to achieve rich combinations, changes, convenience, strong interchangeability, multi-function and ease of use. Preservable, easy to transport, beautiful and durable.

1. Pipe frame assembly structure (1. Ball joint multi-directional bolt-fastened joint is a spherical structure with 18 screw holes. The frame is in the form of a round tube with rotatable bolts at both ends. , can be used in various transformations and combinations.

(2. The plug-in combined connection component adopts a 2-6-way joint method, which can be used for multi-party plug-in combination. The frame structure adopts round tubes or square tubes.< /p>

(3. The grooved circlip frame is a grooved special-shaped alloy or composite plastic tube. The vertical frame has multiple grooves to meet various requirements. The upper and lower horizontal frames are grooved on both sides. Used for clamp-shaped display boards, etc.

(4. The casing and socket are welded into frame components with round steel and assembled with small connectors.

(5. Two The close-to-close type adopts a round tube frame structure, which is fixed by bolts and close-to-close joints.

2. Exhibition panel connection structure

(1. Two-piece tile clamping type. The angle of the connected display panels can be adjusted within the range of 90°--180°.

(2. The multi-directional clamping type is suitable for multi-directional connecting clips and is fastened with bolts.

(3. The eight-way chuck type uses an eight-way chuck connector made of metal and plastic, which allows the exhibition panels to be assembled in all directions or extended upward.

(4. The two hinge clip-type clips are fastened with bolts, and the angle of the assembled display panel can be adjusted at will.

3. Display cabinet assembly structure? Folding display cabinet booth and The base part of the showcase adopts a folding frame plate, which can be covered with a countertop after unfolding; the glass of the showcase can be inserted into the groove of the countertop, and the four corners are connected with corners or brackets.

Display cabinet manufacturer.

Changzhou Zhongmei Display Equipment Co., Ltd.

Changzhou Zhongmei Display Equipment Co., Ltd. is a professional designer and manufacturer of exhibition displays, specialty stores, chain stores, corporate image showrooms, supermarket showcases, etc. Production and construction unit. Mainly serving exhibition hall decoration, interior decoration and display cabinet design and production of specialty stores, personal stores, company exhibition halls, shopping malls, supermarkets, clubs, hotels, etc.

Dongguan Hezheng Display Cabinet Co., Ltd.< /p>

Dongguan Hezheng Display Cabinet Co., Ltd. was established in 2001 and is located in Dongguan City, Guangdong Province. It is a manufacturer specializing in the production and sales of various display cabinets. Its main products include: various specialty stores and various displays. Cabinets, various display shelves, etc.

Shenzhen Jingxing Display Products Co., Ltd.

Shenzhen Jingxing Display Products Co., Ltd. is a company focusing on retail terminal display racks/display cabinets for overseas markets. Equipment design engineering company. The company has been engaged in the foreign trade advertising equipment industry since 2005, and focuses on the custom design and production of display racks/display cabinets.

Although the display cabinet is just a counter for displaying goods, it is It is also a commodity in itself. Display cabinets are used in shopping malls, supermarkets, and stores to display goods and store goods. They have a unique appearance and powerful functions, and also have advertising effects. In order to achieve better profit purposes and provide a better platform for brands. A good display cabinet has the above characteristics and can make the displayed products more exquisite and attractive. Therefore, the display cabinet affects the image of a brand, and the production of the display cabinet determines the quality of the display cabinet.