Template of departmental power outage emergency plan (8 pieces)

Comprehensively strengthen disaster prevention and mitigation work and raise public awareness of safety prevention. In the face of some uncontrollable accidents and disasters, emergency plans can be made in advance. How to write an emergency plan? The following is the column of "template of departmental power outage emergency plan" that I carefully arranged. I suggest you collect it and share it with other friends in need!

In order to do a good job in emergency rescue and disposal after sudden power failure of the hotel, ensure that the hotel effectively organizes relevant departments to carry out emergency rescue in case of sudden power failure, and minimize unnecessary losses and consequences, the emergency plan for sudden power failure of the hotel is formulated in accordance with the relevant regulations of the higher authorities and the actual situation of the hotel. After the sudden power failure, the work division of relevant departments is as follows.

The work of the Ministry of Security:

1. Once the hotel suddenly loses power, the employees at the highest level in the store will immediately organize employees at all positions to take corresponding emergency measures, and call all the security guards on duty to divide the work, assign security guards to control the entrance and exit of the hotel, check out the articles and personnel going out, and strictly control them to prevent the outflow of property.

2, quickly send security guards to check the elevator along each floor, using propaganda, flapping to check whether there are trapped people in the elevator, if there are trapped people, immediately notify the engineering department and actively assist in taking rescue measures.

3. Send security guards to patrol all floors continuously, especially to strengthen the safety patrol inspection of key parts, places and areas, mainly to check the door locks of floors, emergency lighting of floors, personnel activities of floors, etc. To prevent people from using power outages to commit crimes and fish in troubled waters.

4, notify the relevant departments to do a good job in the protection of important facilities and equipment after power failure, to prevent damage.

5, do a good job of emergency and handling all kinds of emergencies after power failure.

6, actively supervise and assist the engineering department to find the cause of the power outage, and restore power supply as soon as possible.

Housekeeping work:

1. If the hotel suddenly loses power, the employees at the highest level in the store will immediately organize employees at all positions to take corresponding emergency measures. Floor staff should carefully check the rooms and writing rooms on each floor to prevent people from lighting candles or throwing cigarette butts to cause fire accidents, and at the same time do a good job of reminding guests and patiently explaining.

2. When the power outage lasts for a long time, the waiter should advise the guests not to panic and try to meet the needs of the guests. When guests ask to leave the store, they should be well guided. In case of emergency, evacuation should also be done to guide guests to evacuate from the escalator to the outside of the store.

3. The front desk should immediately save and back up the historical data of the guests, and inform the assistant manager of the lobby to stick to his post, handle relevant complaints and coordinate to solve related problems caused by power failure.

The bellman should take good care of the guests' valuables and try to control foreigners to enter the hotel after the power failure.

5, the service center should do a good job of customer information transmission and all kinds of consultation, and try our best to do a good job of customer service after power failure.

Food and beverage department work:

1. Once the hotel suddenly loses power, the employees at the highest level in the store will immediately organize employees at all positions to take corresponding emergency measures. The catering staff should carefully check all business premises and consumption rooms to prevent people from lighting candles or throwing cigarette butts, and do a good job of prompting and patiently explain to the guests.

2. When the power outage lasts for a long time, the waiter should advise the guests not to panic and try to meet the needs of the guests. When guests ask to leave the store, they should be well guided. In case of emergency, evacuation should also be done to guide guests to evacuate from the escalator to the outside of the store.

3. When there are many consumers, the waiter should pay more attention to the entourage, observe the trends of consumers and their surroundings, give tips and care to the guests' belongings, and properly keep the items stored by the guests.

4. The kitchen staff should carefully check the stoves, pipes, high-power electrical appliances and other important equipment, turn off the power supply, electrical appliances, oil valves and various switches, and take corresponding preventive measures.

Work of engineering department:

1. If the hotel suddenly loses power, the employees at the highest level of the department in the store will immediately organize employees at all positions to take corresponding emergency measures. First, find out the cause of the power outage at the first time.

2. When the power supply bureau system is out of power, immediately call all the personnel on duty and go to the lobby, power distribution room, exchange station, restaurant and floor to check the emergency lighting facilities in pairs, and turn the corresponding electrical equipment switch to the off position.

3. Elevator rescuers quickly open the door of the nearby elevator car hall and call loudly to confirm whether there are any guests trapped in the elevator and the location of the elevator. If it is not in the flat position, quickly rush to the elevator machine room of 14/F, immediately turn off the power switch after opening the door, remove the protective cover of the traction machine brake, gently press the mechanical brake with special tools, and when the elevator car slowly slides to the flat position, open the car hall with the special mechanical maintenance key for the elevator.

4, exchange station lithium bromide unit, plate exchanger and volumetric exchanger once power failure, immediately turn off the steam, so as not to damage the equipment.

5. When the power distribution room can't supply power normally due to water inflow, fire and other reasons, in case of emergency, the power supply of domestic pumps, fire pumps, spray pumps, elevators, monitoring rooms and so on can be ensured by switching to the state of fire standby power supply, so as to ensure the operation of important equipment.

6. If the electrical components of the branch circuit in the distribution room fail, you can immediately disconnect the branch circuit and put up warning signs to ensure the normal power supply of other circuits, and then try to solve it.

7, during the power outage, it is forbidden to use open flame operation, isolation belt should be set around flammable items, and strengthen inspection.

8. During the power outage, the employees on duty in the engineering department should obey the unified command of the manager and report the latest developments in their respective regions in time.

The work of the finance department:

If the hotel suddenly loses power, the employees at the highest level of the department in the store will immediately organize employees at all positions to take corresponding emergency measures. The finance department office should store cash, checks and seals, and the front desk and cashier point should also manage cash immediately and save and back up customer historical data.

Work of Marketing Department, Human Resources Department, Purchasing Department and General Manager's Office:

In case of sudden power failure in the hotel, the highest-level personnel in the department in the store will immediately organize personnel in all positions to take corresponding emergency measures, and office personnel should stick to their posts and do a good job in the management and custody of various agreements, personnel files and other important materials.

Special emphasis is placed on:

After a sudden power outage, all departments should coordinate with each other, cooperate closely, complete their work according to the contents of the plan, and strive to control and reduce the losses caused by the power outage to a minimum.

Template of departmental power outage emergency plan (II) emergency plan

(a) in the process of surgery, if suddenly encountered unexpected power outages, tripping and other emergencies, medical personnel should take remedial measures to ensure the smooth progress of the operation.

(2) If there is a power failure in the operating room, immediately check whether there is a trip or fuse problem, and solve the corresponding problems.

(3) If it is a general power failure, immediately enable the temporary maintenance function of the standby batteries of each instrument, and notify the electrician class, general affairs department and other relevant departments to generate electricity. If there is no instrument with battery device, manual operation is feasible.

(4) During the power outage, the nurses in the operating room shall not leave the operating room, and closely observe the patient's condition changes, so as to deal with emergencies at any time.

(5) Turn off all electrical instruments, so as not to damage them when suddenly calling.

(6) After the call, open the instrument used in the operation and readjust the parameters.

(7) Nursing staff will accurately record the patient's process, time, reasons and special circumstances, or write a report to relevant departments.

(8) Every nurse should be familiar with the telephone number of the electrician class and the route of each operating room.

(9) The storage battery of the instrument should be kept in a long-term standby state, and someone should be responsible for it, and it should be checked regularly to maintain emergency use.

procedure

Find out the reason → Enable battery maintenance → Observe the condition → Turn off all instrument parameters → Re-adjust all parameters after the call → Record the power outage process and the patient's situation and report it → Charge the battery for standby.

Template of departmental power outage emergency plan (Chapter III) 1, purpose

This plan is formulated in accordance with relevant national laws and regulations, combined with the actual situation of the whole plant, in order to deal with the sudden power outage accident, quickly and orderly organize the resumption of power supply production, ensure life safety and reduce the loss of equipment and property.

2. Scope of application

Factory-wide production unit

3. Responsibility

Do a good job in daily safe power supply, implement the responsibility system for safe production, and prevent unexpected power outages. In case of power failure, do a good job in power failure emergency in time and restore power supply as soon as possible.

4. Emergency procedures

4. 1 emergency procedures for planned power failure

4. 1.65438+

4. 1.2. After receiving the power outage notice, each department should do a good job of power outage and power restriction according to the power outage plan formulated by the department.

4. 1.3, after the power failure, in the shortest possible time, in accordance with the "generator safety operation procedures" and "stop, power transmission operation procedures" for power failure and power transmission operation.

4.2, accident power emergency procedures

4.2. 1 In case of sudden power failure, first of all, it is necessary to find out whether the high and low voltage switches are tripped or the mains power is cut off. If the switch trips, find out the reason and resume power transmission after troubleshooting. If the mains power supply is cut off, the emergency procedures for unexpected power failure shall be followed.

4.2.2. The power outage is caused by an accident in the power supply line other than the mains. This kind of power outage can be divided into two types: large-area power outage and instantaneous flash.

4.2.3 When the dispatcher on duty finds a power outage, he should immediately ask the chief dispatcher about the power outage reason, and inform the workshop leaders and relevant duty posts in time.

4.2.4, find out the reason, take immediate measures to determine the treatment plan.

4.2.4. 1, serious accident power failure can't be restored immediately, so an emergency plan for power failure should be made immediately.

4.2.4.2, the instantaneous flashover power failure is due to a small fault without tripping, resulting in instantaneous voltage loss. This power outage is resumed according to the normal stop and close operation procedures.

After power transmission, 4.2.4.3 should make a phone call to inquire about the cause of flashover fault, and record the handover on the duty record after knowing the details.

Template of departmental power outage emergency plan (Part IV) 1. In case of power outage notice, the engineering department of the management office shall notify every household and merchant of the power outage line, area, time, elevator use and safety precautions in advance, and issue power outage notices at the main entrances and exits; At the same time, the engineering department should do the emergency work before the power failure.

2. In case of sudden power failure without receiving any notice, the engineering department shall immediately confirm whether it is an internal fault power failure or an external fault power failure. If it is an internal fault power failure, immediately send someone to find the reason and take measures to prevent the fault from expanding; If it is an external power outage, on the one hand, it is necessary to prevent accidents caused by sudden calls, on the other hand, it is necessary to call the Power Bureau to inquire about the power outage, know when to restore power supply, and inform the management and operation department of the information.

3. The security department will immediately send someone to each floor to check the elevator operation jointly with the engineering department. If the elevator is found to be closed, it will immediately carry out rescue according to the elevator emergency plan.

4. The customer service department of the management office will immediately notify the residents and merchants of the power outage and issue power outage notices at the main entrances and exits. When necessary, the emergency broadcast system will be activated to inform residents and ask them to remain calm and take preventive measures.

5. In case of sudden power failure, when the mall is open at night, the security department should assist the mall to maintain good order, guide the merchants to use emergency lighting, candles and other backup lighting to evacuate customers, and pay attention to fire prevention to prevent fire.

6. Arrange employees to the main entrance and exit of the community and the elevator hall to maintain order. Security guards should strengthen security measures to prevent people from creating chaos, fish in troubled waters, and close the door when necessary.

7. Send people to guard the office and duty room, patiently receive inquiries from residents and merchants, do a good job of explanation and guidance, and prevent conflicts with residents and merchants.

8. Record the time, causes, countermeasures and losses caused by the power failure accident in detail.

9. Preventive measures for sudden power failure:

1) The engineering department shall regularly check the emergency lighting and emergency broadcasting system to ensure normal operation.

2) The customer service department of the management office reminds office residents and merchants to prepare some emergency lights or candles in case of power failure.

3) In addition to flashlights for patrol and maintenance, the escort department and the engineering department should also be equipped with portable emergency lighting, which can be charged and maintained at any time to keep them in good condition.

Template of departmental power outage emergency plan (Chapter 5) Under normal production conditions, an unexpected power outage may occur in the whole plant or the main control room, causing great losses to production and equipment. In order to minimize losses, instrument professionals should take corresponding emergency measures.

A, the personnel responsibility in the accident

Instrument manager: responsible for organizing instrument maintenance personnel to enter the site for maintenance, professional command and coordination, and organizing professionals to analyze the cause of the accident;

Technician: rushed to the scene at the first time to check the DCS system, self-protection system and related instruments in the control room. In order to ensure the timeliness of UPS power supply, some unimportant auxiliary equipment was stopped and the cause analysis of the accident was taken part.

Instrument maintenance personnel: cooperate with technicians to adjust the on-site process and resume work after the power supply is normal.

Second, the power outage emergency procedures

1. In case of unexpected power failure in the main control room, Party A must report to the shift supervisor or the deputy manager of instrument specialty of the company as soon as possible.

2. The emergency response members of unexpected power failure are divided into two groups: the control room emergency team and the on-site emergency team. Team members are clearly fixed, indicating the team leader.

3. The instrument professional manager and technicians of the company shall immediately organize the members of the emergency team to implement the emergency plan for unexpected power failure, and shall not delay the opportunity, and get in touch with the professionals in the functional room of the Division to coordinate the operation.

4. The emergency team in the control room should immediately enter the operation room and control room for inspection under the command of the team leader, and confirm whether there is power failure. The members of the emergency team in the control room should cooperate with the team leader to assist the emergency response. (Prepare emergency tools, such as emergency lights, multimeter and screwdriver)

5. The phenomenon of power failure in the main control room is generally that all lighting is cut off, and only emergency lighting is normal.

6. Measure the power line voltage of the power distribution cabinet in the main control room with the AC 750V gear of the multimeter to see if there is power failure.

7. Under the condition of confirming that the power outage is true, the leader of the emergency team in the main control room will operate, pull down the air switch of the main power supply of each power distribution cabinet and disconnect the main power supply circuit; Then, from top to bottom, from left to right, turn down the power air switch of each cabinet and equipment to disconnect the sub-power circuit. At the same time, the on-off state of each switch before toggling the switch is recorded in detail.

8. The emergency team in the control room should assign a team member to keep in touch with the process in the operation room, so as to keep the coordinated action between the process operator and the operation shift on duty.

9. The emergency team in the control room should carefully check the instrument cabinet to see if there is any equipment damage caused by power failure, and make all preparations for re-energizing.

10, the members of the on-site emergency team prepare the necessary maintenance tools and lighting tools under the command of the team leader, and go to the on-site operation room to stand by and be ready to deal with the unexpected problems that may occur on site at any time. No one is allowed to leave his post at will.

1 1. When the shift supervisor finds a power outage, he should keep a clear head, reasonably arrange the members on duty to take emergency measures, keep close contact with the professional leaders of instruments and process operators, pay attention to priorities, do a good job in command and coordination, and report the power outage to the dispatcher on duty at the same time, and get in touch with electric to jointly find out the reasons for the power outage.

Three, after sending the processing program

1. Instrument personnel shall immediately ask the operation department for instructions after receiving the power supply, and the power transmission scheme can only be implemented after the operation department confirms that the power supply is allowed.

2. The leader of the emergency team in the control room shall organize inspection of the power distribution cabinet to confirm whether the power supply is back to normal.

3. Measure the voltage of the power cord with a 750V multimeter to check whether the voltage is stable. The voltage range should be within 220 VAC 10V. If the voltage is too high or too low or fluctuates greatly, power transmission is not allowed. Power can only be supplied after notifying the electrical inspection and restoring the normal power supply voltage. At the same time, the process operators in the control room should be notified to monitor before power supply.

4, by the control room emergency team leader, according to the order from main to secondary, from top to bottom, from left to right, according to the detailed record of the open and close state of the air switch recorded before disconnecting the air switch, restore the position of each air switch before power failure.

5, shall not be forced to close the air switch after jump switch, if there is such a situation should report to the monitor on duty to check the reason, troubleshooting, confirm the normal rear can close the switch. Before that, you can turn off other normal power switches.

6. After the power supply of the main control room is completely restored, all cabinets and stations in the control room should be inspected and tested to see if the voltage is normal, and detailed records should be made. Check whether the 24V DC power supply voltage of each station and safety grid cabinet is normal.

7. Check whether the cards in each station are normal through the system maintenance panel of the operation station, and carefully ask the process operators whether they find any abnormal situation, and keep the patrol inspection every 15 minutes within one hour after power-on, and make records.

8. After the power supply returns to normal, the personnel on duty should carefully record the unexpected power failure accident, which should include: power failure time, power transmission time, detailed treatment process and power failure reason analysis.

9, all members of the operation class under the guidance of the monitor, to assist the process operators to get ready to resume production.

Template of emergency plan for department power outage (6) (1) In case of unexpected power outage, tripping and other emergencies during operation, medical staff should take remedial measures to ensure the smooth operation.

(2) If there is a power failure in the operating room, immediately check whether there is a trip or fuse problem, and solve the corresponding problems.

(3) If it is a general power failure, immediately enable the temporary maintenance function of various instrument backup batteries, and notify the power maintenance technician class, general affairs section and other relevant departments to generate electricity. If there is no instrument with battery device, manual operation is feasible.

(4) During the power outage, the nurses in the operating room shall not leave the operating room, and closely observe the patient's condition changes, so as to deal with emergencies at any time.

(5) Turn off all electrical instruments, so as not to damage them when suddenly calling.

(6) After the call, open the instrument used in the operation and readjust the parameters.

(7) Nursing staff will accurately record the patient's process, time, reasons and special circumstances, or write a report to relevant departments.

(eight) every nurse should be familiar with the telephone of the electric maintenance technician class and the lines running between the operating rooms.

(9) The storage battery of the instrument should be kept in a long-term standby state, and someone should be responsible for it, and it should be checked regularly to maintain emergency use.

procedure

Find out the reason → Enable battery maintenance → Observe the condition → Turn off all instrument parameters → Re-adjust all parameters after the call → Record the power outage process and the patient's situation and report it → Charge the battery for standby.

Template of departmental power outage emergency plan (7) I. Setting purpose

In order to deal with the sudden large-scale power outage accident in the hospital, quickly and orderly organize the restoration of power supply, ensure the safety of patients, reduce property losses, ensure the smooth use of electricity in the hospital, and promote the institutionalization and standardization of accident emergency work, this plan is formulated in accordance with relevant national laws and regulations and the actual situation of our hospital.

Second, the scope of application

The term "sudden large-scale power outage accident" as mentioned in this plan (hereinafter referred to as "large-scale power outage accident") refers to an accident in which important facilities are damaged or destroyed due to serious natural disasters, the security line of large-scale power system in the whole hospital suddenly fails, and the power grid collapses or collapses in a large area.

Third, the emergency principle.

The principle of "prevention first and constant vigilance" and the principle of "unified leadership, perfect mechanism, clear responsibility, strengthened cooperation, quick response and decisive measures" are implemented in dealing with large-scale power outage accidents.

Fourth, organization

The hospital has set up an emergency leading group for large-scale power failure accidents and an emergency repair team.

1 Emergency Leading Group for Large-scale Blackout Accidents in Hospitals

Team leader: general manager

Deputy Head: Dean

Member: Manager of Personnel Administration Department

Logistics Supervisor

Electrical maintenance responsibility:

(1) Do a good job in the daily safety of power supply personnel, implement the responsibility system for production safety, and prevent large-scale power failure accidents.

(2) In case of large-scale power failure, do a good job in emergency treatment of power failure and restore power supply as soon as possible.

(3) According to the severity of the large-scale power failure accident, decide to start and terminate the emergency plan.

(4) Report the accident to the superior in time and make it public.

(5) Request external support when necessary.

(6) The leader of the leading group is the first person responsible for fulfilling the provisions of this plan. Under the unified command of the leading group, all member units should carry out their duties and cooperate with each other to do a good job in social comprehensive emergency work in case of large-scale power failure.

2 emergency maintenance teams

Captain: logistics supervisor

Member: Electrical Maintenance Worker

Responsibilities: Organize personnel to carry out rescue in case of accident; Report the accident to the command group, send help to the power supply department when necessary, and summarize the experience and lessons of emergency rescue work afterwards.

Verb (abbreviation for verb) emergency procedure

(a) Emergency procedures for electrical personnel in the logistics department

1 emergency procedures for planned power failure

(1) When receiving a phone call from the power supply company or other forms of power outage notice, the electric power personnel must ask about the power outage time, how long it will stop, and the reasons for the power outage, and make records. If you are not in this shift, you should make a clear handover during the shift change.

(2) Notify the leader of the emergency leading group (notify the chief attendant at midnight), explain the power outage reason, specific power outage time and how long it will take to stop, and make preparations for the standby second power supply.

(3) During normal working hours, if time permits, the Personnel Administration Department will issue a written notice to all departments.

(4) If the time is urgent, after receiving the notice from the power supply company, immediately notify the leader of the emergency leading group (notify the chief attendant at night) to explain the situation, and the personnel administration department will send a notice to all departments. Important departments should tell the head nurse of the department when to stop sending electricity and make a plan to stop sending electricity.

(5) Go to the transformer room 30 minutes before the power failure, and make a preliminary inspection of switching the standby secondary power supply. In case of power failure, the standby second power supply should be started within 15 minutes and supply power normally.

(6) Stop all passenger elevators at 10 minutes before power failure.

(7) When the external network is out of power, start the power supply of the generator to ensure the power supply of key departments such as the emergency department of the operating room.

(8) Make a good record of the operation of the standby second power supply and the record after the commercial power is restored.

2 Emergency procedures for temporary power failure

(1) In case of temporary power failure, you should immediately call the power supply company to find out the reason and duration of power failure.

(2) Inform the emergency team leader or shift supervisor to explain the situation.

(3) If the power outage time is short (10 minute), wait for the mains supply before sending the high and low voltage piezoelectric devices.

(4) If the power outage lasts for a long time, immediately prepare to switch the standby second power supply.

(5) When the dual power supply cannot be started for various reasons, the standby generator should be started as soon as possible to ensure the power supply of key departments.

(6) Record the operation of the standby second power supply.

(7) When there is a power outage due to internal reasons in the hospital, it is necessary to find out the cause of the power outage, whether it is a high-voltage circuit or a low-voltage circuit. If the high-voltage circuit fails, the hospital power personnel should immediately introduce the standby power supply, and should contact the emergency repair class of the power supply department in time to recover as soon as possible to ensure the power consumption; If the hospital mortgage circuit fails, it is necessary to quickly find out the reason and restore the circuit according to the operating procedures.

(2) departmental emergency procedures

1 after receiving the power outage notice, all departments should cut off all power supplies and put them into use after the circuit returns to normal.

After receiving the power outage notice, immediately prepare for the power outage. If there is a rescue patient, use the backup power supply.

Immediately after the sudden power failure, look for dynamic methods and operations to rescue patients, maintain rescue work, and turn on emergency lights. And shall immediately notify the electric power personnel or the chief attendant.

4 critically ill patients who use a ventilator during surgery should usually place a simple ventilator next to the machine. Once the power is suddenly cut off, the medical staff will immediately disconnect the ventilator and use a simple respirator to maintain breathing. For patients who use electric nitrogen absorption, use a 50ML syringe to connect the nitrogen absorption tube to absorb nitrogen.

5. If the two lines suddenly lose power, the medical staff must first ensure the patient's rescue, and then the hospital's generator supplies power; Nurses should be calm. Those who go to the ventilator should hold the ball in their hands, those who go to the monitor should measure their blood pressure and pulse manually, and those who suck nitrogen by the motor should take a 50 ml syringe and suck it with a nitrogen suction tube. Observe carefully and ask for change. The rest of the staff should immediately call the electric power personnel and personnel administration department and use emergency lights for lighting.

6 Strengthen ward patrol, appease patients and pay attention to fire prevention and theft prevention.

After the elevator encounters a sudden power failure, the logistics personnel should do a good job of passengers' ideological work, call outside and let all passengers out manually.

Safeguard measures of intransitive verbs

1 Power personnel should do a good job in the daily maintenance of the generator to ensure that the generator is put into use at any time.

2 electric power personnel should master power supply knowledge and operation specifications at ordinary times, and pay attention to operation safety.

3. Clinical departments are routinely equipped with emergency lights, flashlights and other lighting equipment, which are regularly checked and kept in good condition.

The logistics department should organize emergency power failure drills, twice a year 1-2 times. Through drills, be familiar with the emergency treatment process of sudden power failure to ensure the safety of patients.

Template of departmental power outage emergency plan (Chapter 8) In order to prevent and deal with campus power outage quickly and steadily, minimize the impact on teachers and students' life, work and study, and ensure the normal teaching and living order of the college, the following emergency plan is formulated.

First, set up a power outage emergency command team

Team leader: Yin

Deputy Team Leader: Lin Xiangyun

Team members: all members of the power maintenance team.

Second, the emergency command team responsibilities

1. Implement personnel, clarify responsibilities, refine work measures, and implement all work and requirements.

2. Strengthen the daily management of the emergency mechanism, and use and improve the emergency plan in practice.

3. Strengthen personnel training, carry out drills regularly and irregularly, and constantly improve the command and emergency response ability to power failure accidents.

4, generator equipment maintenance, oil reserves.

5. In case of sudden power failure, notify all departments in time to make corresponding preparations.

Three. Classification and treatment measures of power failure events

Class A-All exams involving the use of computers:

In order to ensure the normal progress of the above examinations, the Logistics Department communicated with the Academic Affairs Office in advance, and after soliciting the opinions of the Academic Affairs Office, the electrical maintenance team did the corresponding work. For example, if the weather is fine and there is no power outage notice from the power supply department, will it generate electricity? If the power line fails and power needs to be generated, when the municipal power supply returns to normal, the personnel on duty shall not switch the power supply immediately, and must ask the superior leader for approval before switching the power supply. Computer test, oral English test, even if there is no power generation, the electrical maintenance team should arrange relevant personnel to stand by in the generator room.

Class B-College-level activities, visits by foreign guests and general examinations:

The electrical maintenance team must arrange relevant personnel to be on duty in the generator room. If there is a sudden power failure, it will generate electricity immediately and use electricity normally.

Class C-students attend classes, students take lunch breaks, and in the evening and evening:

In case of sudden power failure, the personnel on duty in the electric service group must generate electricity within 5 minutes to ensure normal power consumption.

Class D-When the power lines in the campus are in urgent need of maintenance and power failure:

The personnel on duty in the power maintenance team must obtain the consent of the superior leaders before they can cut off the power for maintenance, so as not to cause inconvenience to the departments in urgent need of electricity.

All power outages, power generation, emergency repairs, etc. , should immediately notify the relevant departments in written or telephone form to make corresponding preparations and measures.