Traditional Culture Encyclopedia - Hotel accommodation - Related problems of hotel wireless telephone

Related problems of hotel wireless telephone

Our hotel uses Ao Yun's wireless panel ap with telephone interface.

Product introduction

RA series panel AP is a type 86 wall-mounted wireless AP, which adopts the industry-leading IEEE802. 1 1n wireless standard and can provide wireless users with a stable transmission rate of up to 150Mbps. Innovative product design, excellent product performance and unique user experience make it especially suitable for wireless coverage applications in hotels, families, schools and other occasions.

Product characteristics

humanization design

The front of the panel comes with function keys, which can be manually powered off or reset;

Adopt highly integrated design, and the working calorific value is extremely small;

There are two modes to choose from: strong power supply and smart PoE power supply;

Unique LED hidden mode ensures a comfortable sleeping environment for users.

Convenient installation and maintenance

No wiring, no construction, no damage to the original network structure, and no impact on hotel operation;

Hidden design, there is no difference before and after the hotel renovation.

Centralized management function of intelligent AP

P management, user management, traffic statistics, fault detection, remote firmware update and other rich functions to improve hotel management efficiency;

SNMP V3 security level to ensure the security of system management.

Very high cost performance

Support multiple SSID and VLAN division;

Support Mesh network, support two-layer roaming;

The transmission power is adjustable to ensure excellent wireless coverage;

Compared with the traditional way, the comprehensive investment is greatly reduced.

technical condition

RA 150B

Cpu: ar9331802.11b/g/n1stream.

Memory: 32M

Flash memory: 4M SPI NOR flash memory

Working voltage: AC110 v ~ 220 v.

Working temperature: 0 ~ 40℃

Working humidity: 10%~90%RH does not condense.

Standards: IEEE 802. 1 1b, IEEE 802.1g, IEEE 802.1/n.

Ports: 1 WAN port and 1 LAN port.

Working mode: Support two working modes: AP and router.

Antenna type: built-in high-performance WI-FI antenna.

Channel selection: 1- 13

Transmit power: maximum support 18dBm (support power is adjustable).

Cable type: Category 5 and above (all copper wires are required, but 4 copper wires and 4 iron wires cannot be used).

Product size: 86mm×86mm×48mm

?

RA 150BP

Cpu: ar9331802.11b/g/n1stream.

Memory: 32M

Flash memory: 4M SPI NOR flash memory

Working voltage: DC48V (powered by smart PoE), supporting 802.3af

Working temperature: 0 ~ 40℃

Working humidity: 10%~90%RH does not condense.

Standards: IEEE 802. 1 1b, IEEE 802.1g, IEEE 802.1/n.

Ports: 1 WAN port and 1 LAN port.

Working mode: Support two working modes: AP and router.

Antenna type: built-in high-performance WI-FI antenna.

Channel selection: 1- 13

Transmit power: maximum support 18dBm (support power is adjustable).

Cable type: Category 5 and above (all copper wires are required, but 4 copper wires and 4 iron wires cannot be used).

Product size: 86mm×86mm×48mm

?

RA 15 1BP

Cpu: ar9331802.11b/g/n1stream.

Memory: 32M

Flash memory: 4M SPI NOR flash memory

Working voltage: DC48V (powered by smart PoE), supporting 802.3af

Working temperature: 0 ~ 40℃

Working humidity: 10%~90%RH does not condense.

Standards: IEEE 802. 1 1b, IEEE 802.1g, IEEE 802.1/n.

Ports: 1 WAN port, 1 LAN port and a standard RJ 1 1 port.

Working mode: Support two working modes: AP and router.

Antenna type: built-in high-performance WI-FI antenna.

Channel selection: 1- 13

Transmit power: maximum support 18dBm (support power is adjustable).

Cable type: Category 5 and above (all copper wires are required, but 4 copper wires and 4 iron wires cannot be used).

Product size: 86mm×86mm×38mm

?