How does the smart lock connect to the APP?

How does the LeTV smart door lock connect to the mobile phone?

How to connect Letv smart door lock to mobile phone;

1, download the security guard APP, and download and install the security guard APP in the Apple Store or smartphone 360.

2. The security guard APP is bound to the host. After the host is connected to wifi successfully, the mobile phone is still connected to the host hotspot after the mobile phone is connected to wifi successfully. Before binding the host, please connect the phone to the router's wifi or connect the phone to data traffic.

3. Open the mobile APP to connect to the network, enter the page, and select the fingerprint lock button at the bottom of the page.

4. After adding the fingerprint lock, enter the network password on the fingerprint lock, click OK, and the host will prompt you to trigger the detector, open the fingerprint lock to enter the menu, and the network connection will be opened. Click the # key to trigger, and the pairing is successful. The host will prompt that the pairing is successful, and the fingerprint lock will be displayed in the APP fingerprint lock list, and the pairing is complete.

_ How to connect the app with the fingerprint lock?

_ The operation method of connecting the fingerprint lock to the app is as follows:

1, press 3 and # to select network settings, then verify the administrator and enter Add Network.

2. Press the # key to switch the normal mode, and the 8-key LED light flashes, and then configure the network on the APP. This mode should be set when a single user allocates a network. You can also press the # key again to switch to the compatibility mode, at which time the 8-key LED will slowly blink, and then select the compatibility mode on the APP to configure the network. This mode is suitable for fingerprint lock users in hotels and apartments to add networks.

3. If the fingerprint lock flashes 8 keys, and the prompt sound of adding successfully rings, the operation is successful. If the LED shows an X, it indicates that the addition failed and needs to be re-added.

4. Step 2, you can judge whether the fingerprint lock is in normal mode or compatible mode by looking at the blinking frequency of 8 keys, and then select the corresponding mode to add the network. If the fingerprint lock flashes 8 keys, and the prompt sound of successful addition is issued, the operation is successful.

How to connect the app in atomic lock, Jin Dian?

The steps for connecting Jin Dian atomic lock to the APP are as follows:

1. Download and install the "Golden Smart Lock" APP.

2. Open the application and register your account. If you have registered an account, please log in directly.

3. Make sure that Jin Dian atomic lock is installed on the door and close the door lock.

4. The Bluetooth of the mobile phone is turned on, and search for devices in the APP.

5. When you find the device, click Connect and enter the administrator password on the device.

6. After the connection is successful, you can set the unlock mode and authorize the user to operate.

Precautions:

1. Make sure that both Jin Dian atomic lock and the mobile phone have enough power.

2. Make sure that Bluetooth is turned on, and the distance from Golden Point atomic lock is no more than10m.

3. Jin Dian atomic lock must be installed on the door, otherwise it cannot be used.