What is the separation of wet and dry in the bathroom? What should I pay attention to when doing dry-wet separation?

The bathroom is an important part of the house. When decorating the house, we should pay more attention to the decoration of the bathroom, such as the separation of dry and wet. What is the separation of wet and dry in the bathroom? What are the methods to do dry-wet separation in the bathroom? What should I pay attention to at the same time? Today, we will talk about the separation of wet and dry in the bathroom.

1. What is the dry-wet separation in the bathroom?

Simply put, the dry-wet separation of the bathroom is to separate the sink in the dry area, the toilet in the wet area and the shower room with partitions, which is not only beautiful and safe, but also makes the bathroom cleaner and cleaner.

1, glass half partition

This partition will not enclose the whole shower room, but only on one side of the shower head, so that it will not be stuffy when taking a shower, and it can also play the role of separating wet from dry. However, it is best to design a little slope on the ground to let the water flow to the floor drain or install waterproof strips to prevent the water from overflowing.

2, glass full partition

The dry and wet areas are completely separated by glass, which not only keeps warm, but also has the effect of separating dry and wet. But leave a mouth in the shower area to avoid lack of oxygen.

3. Half partition wall

If the space is relatively large, you can make a semi-partition wall, which can not only protect privacy, but also increase the storage function, and you can also make waterproof strips to avoid water overflow.

4, shower curtain

Among all partitions, shower curtain is the most economical, and there are many styles, so you can choose to replace it according to your own needs. But the shower curtain can't stop the leakage of groundwater, so it's best to install a water stop belt to stop the water.

Second, what should I pay attention to when doing dry-wet separation?

1, sealed

The main purpose of installing a shower room in the bathroom is to separate wet from dry. If you only think that the shower room is for heat preservation, you will definitely make mistakes in sealing. If the main purpose of the shower room is to keep warm, then the sealing should be very good. However, if the sealing of the shower room is too good, there will be a problem of lack of oxygen when taking a bath. The shower room is best to be a sealed dry-wet separation partition, and special attention should be paid when installing the shower room. There should be at least 20 cm gap between shower room and ceiling. With this gap, the ventilation of the shower room can be guaranteed.

2. Water deflector

This circle is called water stop. Families generally use stone (where ceramic tiles are sold), and renting houses generally uses stainless steel or rubber. If there is no water stop, the water on the ground in wet areas will slowly flow to dry areas. At this time, even if the dry-wet separation partition is made, the dry-wet separation effect is still very poor.

3. Floor drain pipe

In the bathroom with dry and wet separation, it is best to install two floor drains, one in the dry area and the other in the wet area. If this scheme is adopted, pay attention to the drainage slope when laying floor tiles. With the dry-wet separation partition as the boundary, the ground in dry area and wet area should be drained to the floor drain in their respective areas.

4. Yuba

Lamp-heated bath bully must be installed in a humid area. Because the lamp-heated Yuba has a small heating range, it will be hot wherever it shines. If installed in a dry area, the light can't find a wet area, and it will still be cold when taking a shower. Air-heated Yuba should be installed in a dry place. Air-heated Yuba will blow air when it works. If installed in a humid area, it will be covered with water when bathing. When the wind blows, it will accelerate the evaporation of water on your body and you will feel cold.

It can be seen that the dry-wet separation of the bathroom is to separate the washstand in the dry area, the toilet in the wet area and the shower room with partitions. There are many ways to separate wet from dry, such as using glass to completely partition or semi-partition, or using floor drain or yuba. , depending on the needs of consumers.