How big is the bar?

People who live in buildings now generally have bars. If you want to decorate a bar, you should first know what the size is when designing the bar and what methods are used when designing the bar. You don't know much about these, so how big is the bar? What are the design methods of bar? Next, we will introduce it to you. I hope everyone can refer to it when decorating.

1. How big is the bar?

1. Generally speaking, the threshold cannot be too high or too low. But its height can be determined according to the height of the user. Usually, its operating platform should be about 90 cm above the ground. However, if it is a single-layer strip, its size is usually around 1 10 cm. If it is a two-bar counter, its height is between 80 cm and 105 cm, and its width is at least 25 cm, so that we can use it. Articles.

2. The location of the bar will certainly affect the design of the loop and water supply and drainage, especially when it is far away from the pipeline or drainage pipe, drainage becomes a big problem. The drain pipe should have a certain inclination angle. If the pole is located near the outdoor, the drainage pipe can be connected to the outdoor and drained through a separate pipe; If the pipes are connected with each other and the inclination is insufficient, when the pipes must be installed from the ceiling or wall, the structure must be very troublesome. The cost will also increase.

3. The size of the stick If you want to use high-power electrical appliances in the induction cooker, such as the induction cooker, it is best to design a separate circuit to avoid circuit tripping.

4. The size of the bar built in the corner of the bar requires at least 90cm of operating space, and the height of the bar has two sizes. Single-layer treaty110cm, double-layer treaty 80cm and105cm. The gap is at least 25 cm. Place the project.

The depth of the table must depend on the function of the pole. The width of the countertop required for drinking only drinks is different. If the seat is in front of the counter, the table top must protrude from the bar itself, so the depth of the table top must be at least 40-60 cm. The width of the lower strip is also convenient for storage.

2. What are the bar design methods?

1. When designing the bar, set the bar in the room. The bar must be regarded as a part of the whole space, not just a piece of furniture. A good design can integrate the bar into the space. There are no specific rules for the position of bar charts. Designers usually suggest using some zero distortion space. If the bar is integrated into the main space, we should consider the direction of the bar. Good design is beneficial and makes life more comfortable.

2. When designing the bar, the location will certainly affect the loop and water supply and drainage design, especially when it is far away from the pipeline or drainage pipe, drainage becomes a big problem. The drain pipe should have a certain inclination angle. If the pole is located near the outdoor, the drainage pipe can be connected to the outdoor and drained through a separate pipe; If the pipes are connected with each other and the inclination is insufficient, when the pipes must be installed from the ceiling or wall, the structure must be very troublesome. The cost will also increase.

3. When the bar was designed, a wall-mounted bar was used. This design method refers to the design of railings against the wall, placing some partitions at the top of the desktop or designing a cabinet to place items. The advantage of this design method is that it covers a small area and can be designed in any restaurant, study and bedroom, but at the same time it can accommodate relatively few people and is suitable for small families.

When designing a bar, what is the general size and what methods are there in the design? The above article is about the approximate size of the bar and the design methods of the bar. Want to know more about the decoration, please continue to pay attention.