How to lay out network cables for monitoring?

Steps for using network cables for monitoring wiring:

1. Determine the location and quantity of monitoring points and the location of the monitoring room.

2. Pull 1 network cable and 1 power cable from each control point to the monitoring room.

3. Connect the network cable to the monitoring room and access the switch. The switch connects the hard disk recorder.

Note: The power cords can be connected in series, and the power control must be in the monitoring room. If it is an outdoor line. Be sure to pay attention to waterproofing.

Monitoring probes all use video cables as the medium for video signal transmission, but they face a big flaw, that is, each video cable can only support one probe to transmit video signals. This means that each camera must be equipped with a power cord and a video cable. If there are two cameras, it is fine, but if there are 4 or even eight cameras, each camera must be equipped with a network cable and a video cable. Lines will bring great trouble to construction wiring.

An eight-core network cable can be used by four camera probes at the same time. In this way, only one eight-core network cable is needed to connect the four video probes, which brings great convenience to the wiring work. Another thing to note when wiring eight-core network cables is that eight-core network cables are divided into indoor network cables and outdoor network cables. Since outdoor wiring is cased, indoor network cables are often used as external wiring.

But after all, one network cable can only connect 4 probes. If there are more than four probes, the connection between the network cables is required. When connecting, you need to pay attention to: before the node of the network cable, Wrap it and then connect it at the end. This is mainly because the network cable is relatively thin, so as to prevent the network cable from breaking when it is pulled.

When arranging network cables in a systematic manner, due to the adoption of the universal standard interconnection system, communication equipment can be installed, debugged, replaced and repaired easily and quickly, thus This enables users to obtain a relatively ideal efficiency return on their investment in this area.