How to configure the hotel air energy hot water system

Hotel air energy hot water system configuration generally requires the following steps:

First: determine the hotel level positioning and the number of beds in the room. For example, a three-star standard room is generally considered as 150 hot water per standard room. Higher level can be appropriately increased, and lower level can be appropriately reduced, but in general, the above quantity can be configured. Take a boutique hotel with 30 rooms as an example. Generally, 4-5T is enough. Configure the host according to the single machine capacity of 25KW. If the hotel's target customers are more women, it can be close to 5T, and if there are more business customers, 4T is enough. Of course, it is not enough to meet some wonderful customers (there is a hotel in Xi 'an that we signed a contract to guarantee, and a customer opened hot water on Saturday and let it go)!

Second: Make clear the geographical location and meteorological conditions of the hotel. The main engine of air energy hot water system is divided into normal temperature machine and low temperature machine, and the normal temperature machine is used in the south of the Yangtze River. Shaanxi Guanzhong includes xi 'an area, so it is suggested to use low-temperature models, so that electric heating can be used in winter (one is safety, the other is energy consumption). Air energy, also known as air source heat pump, will increase electricity consumption in winter, but it will still save more than half compared with electric heating. Therefore, using a cryogenic machine is more energy-saving than using an electrically heated normal temperature machine. Of course, the low-temperature model is slightly more expensive than the normal-temperature model. As for North China, Northeast China and Northwest China, of course, low temperature should be used. The cryocooler project we have done in Yulin has been almost five years now and is still in normal use.

Third: check the space of the hotel. Rooms are a tool for hotels to make money, so one more room is definitely better than one less room. Using the spare space on the roof to solve the problem of hot water preparation should be a wise choice for air energy hot water system. The sales rate of a room is 70%, and there are thousands of income every month. It is good that the hotel hot water can be solved by the roof. This depends on whether there is corresponding space on the roof of the hotel to install air source hot water system (in fact, the roof area within 30 rooms, that is, several square meters and ten square meters, can solve the installation problem of hotel hot water system with about 70-80 rooms. )。 At the same time, we should also find out the bearing capacity of the roof, mainly to see if there are load-bearing walls or beams. Double load-bearing wall/beam or cross load-bearing wall or beam is the best choice. Due to the heavy weight of the filled water tank, it is necessary to have a corresponding load-bearing structure.

A warning: air energy hot water system is a system engineering with considerable technical content. It is not a reasonable design scheme for ordinary plumbers, and it is not safe to buy equipment from the Internet and find a water and electricity fixture. Be sure to find a professional company and team to do it, so that you can install and use it with peace of mind.