How to make stainless steel plate wall in hotel kitchen?

Sometimes for special purposes or ingenuity, we will install stainless steel plates on the walls for decoration. As a background or decoration, stainless steel devices are different from other decorative materials and need some special treatment. Bian Xiao "Spinach" will share some experiences for you.

Tools/raw materials

Stainless steel plate expansion bolt keel

Methods/steps

1/7 Step by step reading

There are many installation methods.

According to the requirements of technology, installation purpose and construction cost, there are many ways to install stainless steel plates on the wall. The most commonly used is to directly fix the stainless steel plate with expansion bolts and drill holes in the wall with impact drills; You can also stick special glue on the wall and fix it with special glue; You can also prepare the foundation, install the frame, and then install the stainless steel plate. This way should be more appropriate.

2/7

Do a good job of wall treatment before installation.

Before installation, the wall surface and the inside of the wall in the installation area should be well treated. The water and electricity pipelines in the wall should be installed as planned, and the relevant pressure pipelines have been tested and meet the requirements; The wall surface has been leveled to ensure that the wall surface is dry and has corresponding construction conditions.

Tangshan Ruierfa partition board provides you with high quality _ low price partition board.

advertisement

3/7

Prepare to mark

According to the specific construction plan and requirements, according to the height and width of the floor, the elevation of the wall is processed, the height is measured with a box ruler, and marked on the wall in different levels. This is the "elastic line" construction step in the construction, and the specific line drawing should be very careful and clear. This step determines whether the stainless steel plate is installed smoothly and whether the gap between plates is appropriate, which has an important impact on the whole construction quality.

-Which partition is good? _ Shanxi Yahua Haozao _ Excellent quality

advertisement

4/7

Mounting keel

After marking, the installation of keel begins. Let's briefly introduce what a keel is. Keel is a kind of building material used to support the shape and fixed structure of the wall, and it is a very common skeleton in decoration. The general order of keel installation begins with suspenders, large keels, small keels and slats. During construction, attention must be paid to the accurate installation according to the marking, and the joints should be fixed firmly with bolts and threads, and the spacing should be set aside as usual to facilitate the installation of stainless steel plates.

Partition board manufacturers direct sale partition board

advertisement

5/7

Do a good job of rust prevention.

The keel material is generally made of metal, which is placed on the wall and the panel is buckled on it. After a long time, it will oxidize and rust, which will affect the safety of the material. Therefore, after installation, derusting treatment should be carried out. The key point is the surface of the welding place, such as connection points and fixed points, which should be coated with antirust paint before the next process, and the relevant treatment should be done well.

advertisement

Jiantianxia airless spraying machine nozzle wear-resistant latex paint putty coating nozzle 625 nozzle+cushion

JD.COM recommended it for you according to the content of the article.

50 yuan

examination

6/7

Installing stainless steel plate

Before the installation of stainless steel plate, it is necessary to check and accept the preliminary construction to ensure that the construction technology is qualified, because after the installation of stainless steel plate, the preliminary construction is blocked and it is not convenient to check and accept again. After the acceptance, start to install the stainless steel plate. If it is a whole piece of steel plate, it will be installed directly, folded and pressed in layers. If it is multiple steel plates, it is necessary to install one plate and seal it in layers to ensure that it is installed straight along the keel.

7/7

Related precautions

During the installation process, it is necessary to pay attention to the construction in strict accordance with the operating specifications. When installing, handle with care to avoid deformation and damage of related parts and contact with other hard objects, so as to avoid scratching the stainless steel surface and affecting the effect. Stainless steel plate and keel buckle are firm, and the corresponding moisture-proof, heat insulation and rust prevention treatments are made.