What are joint tiles and seamless tiles?

When two bricks are put together, there is an obvious gap. When the bricks are stuck together, the gap is large, the lines are obvious and the three-dimensional effect is strong.

Seamless brick, two bricks together are basically a thin line. If it is pasted, the seam is small and it is not easy to get dirty.

The following is the difference between the two.

1 and seamless brick are generally large-sized tiles, such as 300*450, 330*600, 360*660, 600*900, 660* 1000, etc. Because of their large size, the number of tiles used is small, and seamless technology is adopted, which caters to modern consumption fashion and product laying.

2. seamless brick has a high demand for construction technology, and pays attention to leveling the shop, adjusting the joints from top to bottom, left and right. Generally, it is difficult for bricklayers in seamless brick not to lay regularly.

3. The specifications of jointing bricks are small, such as 100* 100, 150* 150, 200*200, 200*230, 250*330, etc. The construction of jointing brick is not difficult and easy to be laid, but the decorative effect is average.

4. The choice of seamless and seamed tiles should be decided according to personal preference and the size of the house space. The size of the purchased tiles should match the space of the house to be decorated as much as possible, so as to obtain a beautiful and harmonious decoration effect. Otherwise, blindly pursuing big tiles or small tiles will often leave regrets for yourself.

Whether there is a joint or a seamless brick, it must be operated in strict accordance with the formal procedures, especially the expansion joint of 1- 1.5 mm should be left between bricks, so as to adapt to the shrinkage prestress of ceramic products and prevent the brick from cracking and peeling due to seamless construction quality problems.