How to set up the H3C ER5200 router?

H3C ER5200 is a high-performance gigabit downlink router introduced by H3C Company, which is mainly located in SMB market with Ethernet/optical fiber /ADSL access, as well as network environments such as government, enterprises and Internet cafes, such as Internet cafes, enterprises, schools, hotels and other places that need high-speed Internet bandwidth. Below, I will share with you the setting method of H3C ER5200 router, hoping to help you!

How to set up the H3C ER5200 router?

First, you have to connect the operator's network cable to the WAN port above the router.

Then log on to the router. Generally, the default IP is 192. 168. 1 or192.168.0. This is written on the back of the router. Look if you don't know.

Click Interface Settings-WAN Settings.

Set the access mode of WAN port. The operator's network cable is connected with the WAN 1 port, and then the WAN 1 port is set, and then the WAN2 port is set.

If it is for home use, you will generally choose PPPOE.

If it is an optical fiber, select a static address.

This kind of router is generally used by companies.

Then fill it in. If the Internet pass given to you by the operator is PPPOE, it means to fill in the account number and password. If it is a static address, it means to fill in a static IP address. These are all given by operators. If you don't know, ask them.

Set the WAN port and remember to turn on the DHCP function. Because it is a company route, DHCP function is not enabled, so you need to fill in the assigned IP address you need.

After the setup is completed, check whether the WAN port is connected successfully. If the connection is successful, it will be fine.

Finally, the client accesses the LAN port, obtains the address allocated by DHCP, and can surf the Internet.

Extension: Router Settings wifi

first step

The newly bought router will have an installation manual', which will indicate the ip address entered. For example, a wireless router needs to enter192.168.0.1,which is different.

Second step

Connect the wireless router, enter the ip above the description in the browser, and then press Enter. However, it is possible that it will not be opened after input. You can use your mobile phone to connect to the wireless router network and use your mobile browser to open this ip address.

Third step

After entering the ip, you will be prompted to log in. The default account password is admin. Log in after entering.

Fourth step

After successfully logging in, click Setup Guide in the left navigation bar.

Step five

You can choose the next step for the next few options, and there will be relevant tips and explanations in the manual.

Step 6

Enter the broadband account and password, and then click Next.

Step 7

Enter two important, the most important is the password. SSID is the account name of wifi, and WPA is the password of wireless network.

Step 8

Click Next, and then click Finish to restart the router. After the restart, the wireless network will be successfully established.