Traditional Culture Encyclopedia - Hotel franchise - How to install the whole box sunshade?

How to install the whole box sunshade?

There are many kinds of awnings. What I recommend to you today is the price and installation method of the full-frame awning. From this, we can know that the so-called full-box awning may have better shading ability. First of all, they are basically made of waterproof, moisture-proof and corrosion-resistant composite materials. On the other hand, there are many colors to choose from. More importantly, the full-box awning has a large shading area, and basically does not leave some dead angles, which is especially suitable for daily life at home or in some outdoor places. I believe it can create a more comfortable atmosphere and environment for us as much as possible in hot summer.

First, the price of full-frame awning

1, Shanghai Vigley? Awning? Outdoor awning

Company name: Shanghai Vigeli sunshade products Co., Ltd.

Starting price:? ¥500

2. Jinshunda sunshade

Company name: Shenzhen Jinshunda Awning Co., Ltd.

Starting price:? ¥55

3. Rui Wei? Telescopic canopy? Parking canopy? Awning? awning

Company name: Hangzhou Bai Rui Outdoor Products Co., Ltd.

Starting price:? ¥228

The above prices are for reference only.

Second, how to install the whole box sunshade?

The base surface of waterproof construction shall be solid, flat and smooth, and there shall be no looseness, sand, cracks, cocking, spikes, potholes and hollowing.

Construction requirements of waterproof main and auxiliary materials:

Mortar ratio: the weight ratio of cement to special rubber powder is 100 (cement): 1 (rubber powder): 50 (water) (appropriate amount of water).

Proportioning method: first put the rubber powder into the container, then add the cement and stir. After mixing evenly, add water and stir into paste liquid for use.

Play a good baseline on the basis of construction and adjust the coil in advance.

There can be no open water surface on the base surface. If it is very dry, it is necessary to sprinkle water on the base surface to keep warm.

The ground and coil should be painted evenly, without omission. After straightening, it shall be compacted and leveled.

One-component polyurethane edge sealing should be carried out at the joint seal.

For each building, the first floor is followed by the wall, the second floor is followed by the bedding face, and the foundation pit (sump pit, ground foundation pit, etc.). ) After that, the construction of large bottom plate surface should be carried out. The large surface of each building can be constructed from the middle to both ends.

Construction conditions

(1) The construction temperature of polyethylene polypropylene waterproofing membrane should be above 5℃ and below 25℃. Construction is prohibited in rainy days, snowy days and strong winds of magnitude 5 or above, and rainproof measures should be taken in rainy days during construction.

(2) The leveling layer is qualified. As long as there is no Mingshui under wet conditions, grass-roots construction can be carried out.

The above recommendation is about the price and installation method of full box awning. Therefore, the so-called full-box awning is not the same as ordinary awning. They have better shading range and better shading ability, and can create a cool place for us in hot summer. In addition, this awning is made of waterproof, moisture-proof and corrosion-resistant materials, which will not be affected even in rainy days. Interested friends can compare and understand the needs of the actual place.