What methods are there for marble anti-skid treatment in shower room? How to install marble in shower room?

Every family will set up indoor space for bathing, exquisite friends will continue to set up shower rooms, and everyone will pay more attention to decoration when setting up shower rooms. According to statistics, many friends now use marble for ground treatment. Let's take a look at how to solve the problem of marble anti-skid in the shower room. Friends who are interested in this matter come and find out. We summarized the problem of marble installation method in shower room. Friends, remember to enjoy it after reading it!

What methods are there for marble anti-skid treatment in shower room?

1. Use different kinds of anti-skid pedals. That is, the anti-skid pedal is placed on marble, and anti-skid boards with different sizes can also be customized according to the size of the whole shower room. Common wood flooring, plastic and melamine resin plate. The best foot is the anticorrosive wood floor. Feet are warm, so it is not easy for water to soak feet in hot water.

2. Use a non-slip mat. Many people can try to use anti-slip mats after laying floor tiles, but they don't want to repair them. This is the most cost-effective method. There are many sizes, colors and styles, you can choose according to your own needs, but this one has a short service life and probably needs to be replaced every few months.

How to install marble in shower room

1. First, the drawings shall be laid out according to the design scheme, and the infrared induction level shall be used for underground construction, so that the horizontal and vertical lines are perpendicular to each other.

2. Confirm the design elevation of the ground from the elevation control point of the floor, and make a reference point on the ground at intervals, so as to control the height of the ground during paving.

3. Scrape a layer of plastering mortar or waterproof putty on the ground, and then stir-fry the dry-bonded cement mortar. The mixture ratio of mortar is mostly according to the approximate ratio of concrete and coarse sand 1: 4. It is most appropriate to hold the dough with your hands, wait until it falls to the ground, and spread it with cement mortar for leveling.

4. On the basic premise, all marbles are protected by six-sided alkali-proof back coating in the factory to avoid some alkali-flooding after marble paving. If you don't do it, you have to prepare in advance to pave the way. Scrape the back of marble with plastering mortar or plastering mortar, put the marble on the newly paved dry-bonded cement mortar, and level it with a leather hammer.

5. After the floor is paved, the online housing network also needs friendly tips. After the floor strength meets the requirements, the ground cracks will be filled with special jointing agent for marble.