How to use gas in serviced apartments

Turn on the air source switch, fully press the knob, and rotate it counterclockwise to 90° to ignite (the flameout protection stove needs to be pressed for 5-10 seconds to let go for normal combustion). After ignition, the flame cannot stand , indicating that the time of holding down the knob is not enough, please operate it again according to the above method.

If yellow fire, red fire, smoke pot, etc. occur, increase the air intake volume of the damper. If the flame drifts away or the flame is too high, The air intake volume of the damper is reduced.

Because there will be some impurities in the pipe gas to varying degrees, the fire hole of the fire cover will form carbon after being used for a period of time, causing the fire hole to be blocked and leading to backfire. This requires regular cleaning of the fire cover.

p>