What color does colored stainless steel have? This can be achieved by several processing techniques.

1: Product Description Color stainless steel plate is made of high-quality cold-rolled stainless steel (thickness: 0.3MM-3.0MM, width: 1000, 1220, 1500).

; Length: within 5000 meters. ) Divide the stainless steel coil into flat plates through flat plates, strips and edges, and then carry out various surface treatments.

Second, stainless steel surface processing technology

1, the surface of the sanded board has a satin-like silky texture effect, and the surface is dull, forming an irregular transverse short silk. The silky texture on the surface is much shorter than that of the wire drawing board. There are ordinary sand, snowflake sand and so on. Stainless steel surface is polished by abrasive belt, which can be produced by adhesive tape or flat plate.

2. The surface of the wire drawing board looks like filiform texture, which is a processing technology of stainless steel. The surface is dull. Look carefully, there is a trace of texture on it, but I can't feel it. It is more wear-resistant than ordinary bright stainless steel and looks more upscale. Stainless steel surface is polished by abrasive belt, which can be produced by adhesive tape or flat plate.

3. Snowflake sand table feels three-dimensional and intermittent, which is more wear-resistant and beautiful than ordinary smooth stainless steel. Polishing stainless steel surface with abrasive belt. It can be produced by adhesive tape or flat plate.

4. Etching plate is a chemical method to etch various patterns on the surface of stainless steel. All kinds of patterns can be made, and the unfinished patterns need to be opened. There are two kinds of etching, one is photosensitive etching and the other is screen etching. Photosensitive die is cheaper than screen printing die, but the etching cost is expensive. The deeper the etching depth, the higher the processing cost.

5. The embossing plate produces patterns on the surface of stainless steel through physical pressure. Patterns will also appear on the back of the board. Embossed board is produced with adhesive tape. At present, the whole roll is fed and discharged, and the patterned belt is rolled into 6K and 8K plates as required, and then other processes are carried out, such as plating other colors and so on. The common thickness of embossing is 0.5- 1.0.

6. Coating plate is to coat PET or PVC film on the surface of stainless steel, aluminum plate and galvanized plate at high temperature, so that the surface of stainless steel has various patterns and colors. Different from the traditional processing technology, it can make more colors and patterns. Both adhesive tape and flat plate can be processed and produced. The common thickness is 0.4\0.5, and other thicknesses need to be customized.

7. Color steel plate, also known as spray paint plate, is made of high-quality color steel plate and color plate. This process can be made into any color and pattern, flat processing, surface fingerprint protection treatment. However, the pattern pixels made of color steel plate are worse than those of film-coated plate, and the use time is not so long. It cannot be used outdoors, and it will change color in a week or so.

8. Titanium stripping plate refers to electroplating and coloring on the surface of stainless steel, such as titanium gold, black titanium, rose gold, etc. Then, according to the pattern on the mold, the color of the stainless steel surface is removed by chemical method, so that the pattern and color are produced on the stainless steel plate. The mold for removing the titanium plate and the mold for etching can be universal. Flat plate production and processing.

9. At present, there are two kinds of electroplating: vacuum electroplating and water electroplating. Vacuum coating is to put a stainless steel plate in a sealed environment, and then inject various gases to adjust the temperature and time, so that the surface of stainless steel reacts chemically to produce color. At present, the common colors are "titanium gold, black titanium, rose gold, champagne gold, coffee gold, bronze, sapphire blue, emerald green and so on." And a flattening process is used. Water plating is mainly black titanium plating and copper plating. Stainless steel plates are put in a plating bath with chemical agents, and the plates are colored by controlling the time. It is also a flat plate, and all kinds of plates and tubes can be made. But the length of the tank and vacuum furnace determines the length of the products produced.

10,8k (mirror) This process can be produced by adhesive tape or flat plate, and the processing cost is related to the thickness of the plate according to the requirements of the mirror. The machining process is to grind the stainless steel plate surface with grinding fluid through polishing equipment, so that the brightness of the plate surface is as clear and bright as a mirror. This process uses the most advanced grinding equipment for high-precision grinding and polishing to meet the surface requirements.

1 1, fingerprint-free technology, can be used to make flat adhesive tape, and the stainless steel surface is coated with a layer of anti-fingerprint oil, which will not generate fingerprints when fingers touch it, making it easier to clean the stainless steel surface. All kinds of plates, such as wire drawing plate, sanding plate, etc. , anti-fingerprint processing can be carried out.

12, sandblasting refers to the feeling of spraying a layer of sand on the surface of stainless steel, which makes the surface dull and sandblasting uniform. Plate processing.

13, random grain refers to making some irregular silk grains on the surface of stainless steel, also known as grain plate. Plate processing.

14. The laser plate grinds regular or irregular patterns on the stainless steel surface through the equipment grinding head, resulting in 3D stereoscopic impression. Main plane machining.

15, there are two main types of bronze in the electroplating bronze market, matte and bright. Mainly used in high-grade decoration projects. Plate processing is the main thing, and now red bronze can be processed with tape.

Many of the above processes can be combined to produce different effects. Meet customer requirements.

Main uses:

Uses: It can be used for hall wallboard, ceiling, trunk board, building decoration, signboard, luxury door, elevator decoration, metal box shell, mechanical equipment shell, shipbuilding, train interior decoration and so on. , as well as outdoor engineering, advertising nameplate, cabinet ceiling, walkway board, screen, tunnel engineering, hotels, lobby interior and exterior walls, kitchen equipment, countertops, sinks, light industrial products and other industries.