Traditional Culture Encyclopedia - Hotel franchise - How to use cement mortar to level indoor floors

How to use cement mortar to level indoor floors

Determine the leveling thickness based on the type and thickness of the floor covering and the standard line of the finished surface. Generally, the thickness of the surface plastering is not less than 20mm, and the leveling control line pops up on the wall.

According to the leveling control line, plaster the cake around the wall. The size of the cake is generally 5x5cm, with a horizontal and vertical spacing of 1.5-2.0 meters. The upper plane of the cake is the ground surface elevation. If the room is relatively large, marking bars must be applied. The proportions of the mortar used to lay the plaster cake and standard bars are the same as those used to plaster the floor.

The function of cement slurry is to make the connection between the cement mortar and the ground closer. The cement slurry needs to be prepared according to the ratio of 1:0.5. After the preparation is completed, use a broom and other tools to apply it to the ground to form a bonding layer. .

Extended information:

Ordinary cement mortar is used for leveling. Leveling has major defects. The flatness control cannot be the most accurate. The leveling thickness is high, followed by construction. The craftsmanship is prone to causing the ground of the house to increase a lot due to technical problems on the part of the construction party.

Self-leveling ground leveling is a new leveling technology. It uses high-polymer self-leveling cement for ground treatment. It has many advantages. It can level the thinnest ground to 3 mm, and the thickness is controllable. Good, the ground strength is high and the flatness is much higher than cement mortar leveling.

Ground treatment for various sports venues, hotels, offices, precision electronic workshops, etc. that have high ground leveling requirements. It is also suitable to use self-leveling ground leveling before laying wooden floors in home decoration.