Timer setting of heating boilers in Britain

Timer setting of heating boilers in Britain;

1. Press the set key once in the boot standby state, and the four 8 characters on the right and two 88 characters on the left of the clock pattern on the screen will flash. At this point, you can set the hour of Beijing time.

2. Press the setting key for the third time to set the timing. The first is the startup time, and the corresponding icon on the LED digital screen will light up.

3. Press the setting key for the fifth time to set the hours of the timer stop time. After the setting is completed, press the setting key again to set the minutes of the timer stop time. It can blink 5 times after setting, and the key interval cannot be greater than 3 seconds when setting. Connect the setting, press the setting key continuously, and add and subtract keys.

4. Timing 2 and Timing 3 are set in the same way as Timing 1. ..

5. After setting the time switch machine time, just light the timing icon in the upper left corner of the LED digital screen.