Plastic floor laying method

Plastic floor is a common pavement material in the market at present, which is suitable for all kinds of places, such as gymnasiums, schools, hospitals, office buildings, hotels and so on. Plastic floor has long service life, waterproof, non-slip, wear-resistant, easy to clean, environmental protection and no odor. Pay attention to the following points when paving:

Step 1: Prepare.

1. Before paving, it is necessary to carefully measure the size of the ground, and then cut out the plastic floor with appropriate length and width.

2. If the ground is uneven, you need to use grinders, brushes, etc. Reduce the height difference of the ground and ensure the ground is flat.

3. Before paving, put the plastic floor in the shade and lay it flat naturally for a period of time to avoid warping or deformation during paving.

Step 2: Paving process

1. Spread the primer on the floor. The primer shall be evenly distributed, and the thickness shall not exceed 2mm.

2. On the bottom adhesive, check the plastic floor. When the plastic floor is primed, it is necessary to ensure that the extension of each part is connected with the gradual change of the wall or the same type of ground, and that the ground is flat.

3. If the plastic floor needs to be cut, please use the cutting machine to cut it to the required size. In general, parts with special requirements, such as sharp corners, need to be treated with special tools.

4. After the floor installation is completed, it is necessary to clean the floor surface with auxiliary tools (rags, erasers, etc.). ). Don't use any cleaning tools containing rough objects at this time.

Step 3: Completion acceptance

1. After laying, before placing chairs, tables and other heavy objects, the glued plastic floor should be inspected to ensure that there will be no cracks, bubbles, gaps and other phenomena.

2. If there is a problem, it needs to be dealt with in time, otherwise it may cause more harm. If you have any questions, please contact the paver and use professional tools and techniques to solve the problems.

3. Pay attention to avoid collision, friction or sharp objects damaging the surface during use, and do not throw cigarette butts or other sharp objects on the floor.

4. Avoid using acidic or alkaline cleaners to clean the plastic floor, so as not to hurt it.

This paper introduces the laying method of plastic floor in detail. According to the above methods, the paving effect can achieve the expected effect, and at the same time, it can better protect the floor and improve its service life.