I have a floor plan. Why do I need to measure the house?

3. It is convenient for designers and owners to communicate on the ground

When measuring rooms, designers and owners are usually present. If the owner has a certain understanding of the design of the house, he can communicate with the designer to see if these ideas are feasible and the communication is more effective. In addition, if the owner needs to order the main materials in advance, he must also communicate with the site designer before making a decision.

4, to ensure the quality of the house decoration later.

Only when the rolling house is more accurate can we make an accurate design. Don't construct in the later stage, because the size is wrong, it can't be realized, and design changes or project changes are needed. Some items, such as water pipes, heating and gas, may be returned to their original owners if the measurement is inaccurate or inaccurate. I will buy it in the future because the size is not suitable.

Before preparing the volume

A. Remember to bring the house drawings before closing the house: Remember to bring the building water and electricity diagram, building structure diagram, floor plan, etc. with you before closing the house.

B. Understand the rules of hotel property decoration: Before measuring the house, you must also know the residential property where the house is located. For the specific requirements of house decoration, such as the specific requirements of hydropower transformation, can the facade of the house be demolished? Can balcony windows be closed to avoid unnecessary trouble?

Three measuring concepts of measuring room

Quantitative measurement: mainly measure the length, width and height of each hall, and calculate the different uses of each purpose. The size of the room. And put forward reasonable suggestions according to the owner's preferences and daily habits.

Positioning measurement: In this link of measurement, the positions of doors, windows and air conditioning holes are mainly displayed, and the windows need scalars. In the measurement of kitchen and bathroom, the position of sewer pipe, hole spacing, toilet pit distance, distance from the wall, pipe position, gas pipe position and the distance below the pipe and floor drain need to be accurately measured, so as to be accurately located in the design in the future.

Height measurement: In general, the height of a house should be fixed. However, due to the different structure of each house, there may be a certain gap. In the designer's height measurement, it is necessary to carefully check whether the height of each area of the room has dropped, so as to be accurate in future design drawings. There is nothing wrong.

Basic flow of measuring room

1, measure from the door first, measure once and finally return to the other side of the door. It is best to mark the measurement data on the plan when measuring. Can be used for decoration.

2。 When measuring the length and height with a tape measure, the length should be measured near the corner and the height must be measured near the ground.

3。 Record the specific size of this room in another room and measure it.

4。 Measure the length, width and height of the door itself, and measure the distance between the door and the wall. Measure the distance between the door and the ceiling.

5. Measure the size of windows and floors.

6。 According to the measurement method of doors and windows, record the dimensions of switches, sockets and pipes. Kitchen and bathroom put toilet water, floor drain and basin water at No.7, and indicate the distance from the center of toilet to the wall in the plan, which involves the pit distance of buying toilet; And the position of the light beam.

8。 If there are special circumstances during measurement, please clearly mark them with pens of different colors.

9. After all the measurements are completed, in order to ensure the accuracy of the measurement, it is recommended to repeat the test again to avoid missing the measurement.

Which designers are measuring?

1, the location of the lighting window, whether the sunshine time is too long, if the window position is not suitable, the room will be dark or the temperature will be too hot or too cold.

2. Noise Observe the scene around the house and the future noise sources, and determine the distance between the location where noise may occur in the house and the rest area, and determine the solution.

3。 Understand the changes of airflow in different seasons, analyze the air quality, temperature, humidity and smell in different seasons, and avoid possible problems caused by special design.

4. The data accurately understands the length, width and height of the room and the positions of doors, windows, air conditioners and heating by quantifying the room. , can't be in the late stage of construction, because the size is not correct, can't be realized, need to make design changes or engineering changes.

Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~