How to detect the quality of hotel furniture

1. Test the strength

The strength of the board can be pressed with your fingers to feel the firmness of the board. One side of the material should be fixed with a tic-tac-shaped skeleton. If the skeleton is sparse, you will feel empty when you press the surface, and the panel will vibrate greatly. The bottom of the drawer should be pressed by hand to test the strength. Generally, laminates are used at the bottom of partitions, and those with large areas Partitions should be made of five-layer boards.

2. Safety performance

Observe whether the drawer or door frame is tilted, whether the tenon eye position is crooked or too large, the tenon is not tight, and other parts caused by low workmanship. skewed.

Wooden furniture must be safe and stable. When the two cabinet doors are opened 90 degrees and gently pulled forward by hand, the cabinet should not automatically tip forward; the glass of the bookcase door must be After grinding treatment; the dressing mirror and dressing table should be installed with back panels, and the beading should be used to fix the glass surface. Individual parts of the furniture (such as legs, drawers, cabinet doors or brackets, etc.) must have sufficient supporting capacity. You can gently push the upper corners of the furniture or sit on the side to test whether the furniture is firm.

4. Touch the surface

Put your hands on the surface of the furniture and carefully check whether the polished surface is smooth, especially whether the table legs and other parts are rough, and whether there are streaks on the paint. , whether the paint at the corners is applied too thickly, whether there are cracks or bubbles. When the panel is covered with thin wood or other materials, the color and luster should be similar to that of the complete set of products. The paint film on the surface of the product is not allowed to be wrinkled, sticky or leaky.

5. Check the interface

Heavy furniture should be screwed with protective blocks at the corners and glued in place. As for the back panel, you must also check whether it is set properly and the screws are installed.

6. Test the slides

The drawer should be strong and secure, tighten the screws inside. You may wish to open drawers, movable tabletops, cabinet doors and other parts to see if they can be used freely and connected correctly.

7. "Handstand" test

Turn chairs and upholstered furniture upside down to see how they are made.