Traditional Culture Encyclopedia - Hotel franchise - Installation and wiring method of intelligent lighting switch Detailed explanation of installation and wiring method of intelligent lighting switch

Installation and wiring method of intelligent lighting switch Detailed explanation of installation and wiring method of intelligent lighting switch

At present, most of the bedroom lights are installed at the bedside, which is convenient for switching, but the appearance of intelligent switches is not like this. It can be remotely installed anywhere, and the installation and wiring of intelligent switches are also very important. It can only be used normally if it is installed. Let's introduce the connection of intelligent switch.

Intelligent switch connection? Bedroom wiring installation

Generally, the bedroom is wired and installed, and there is a power socket near the switch box. Put the remote control switch of intelligent lighting lamp into the switch box, and lead out two power cords, namely live wire and zero wire, from the nearby power socket, and connect them at the L end and the N end respectively. Remove the three wires of the original switch and connect it with the remote control switch K 1/K/K2 of the intelligent lighting. Pay attention to the three terminals of the original switch; If the bedside switch box is not easy to connect to the power supply, but the bedroom door switch box is easy to connect to the power supply, you can put the remote control switch of the intelligent lighting in the door switch box, and you must not change the wiring. If there is no power supply nearby, you can consider from the lighting. Put a wire on the lamp along the original conduit to the switch box at the door of the bedroom, and then connect it with the zero line at the lamp, and you can install the above connection.

Intelligent switch connection? Single fire intelligent lighting switch

The remote control switch of single fire intelligent lighting lamp is convenient to install. The standard 86-type wall switch can directly replace the original wall switch (suitable for connecting fluorescent lamps, energy-saving lamps, incandescent lamps, spotlights, halogen lamps and other ordinary lamps), and there is no need to connect the zero line and change the lamps.

Intelligent switch connection? Zero intelligent lighting switch

The remote control switch of the fire-fighting zero-intelligent lighting lamp does not need to be rewired, and the lamp does not need to be replaced with any accessories; When in use, select the required lighting group, press the anti-theft key for 5 seconds, the selected lighting group will flash twice, and then go out after a delay of 60 seconds, at this time, the lamp has entered the anti-theft working state; Two-way control, no interference!

The above is the wiring method of the intelligent switch. Have you got a basic understanding after reading it? There are many wiring modes for the installation of intelligent switch, and the specific wiring mode should be operated according to the type of intelligent switch. You'd better ask a professional to install it. I hope the above introduction can help you.