Operation methods and precautions for carpet cleaning machines

Because the carpet is large and heavy, it will accumulate a lot of dirt after people step on it. It cannot be cleaned by a vacuum cleaner. If the carpet is not cleaned, a large amount of dust and bacteria will gather, affecting the air quality and Human health will also affect the service life of the carpet, so the carpet must be effectively and deeply cleaned regularly, and the carpet cleaning machine is a very good cleaning tool. The carpet cleaning machine is a new product with ZL032212437 patented foaming technology. It is suitable for hotels, restaurants, office buildings and other carpet-laying places as well as cleaning companies.

Principle of carpet cleaning machine

The two most commonly used ones are dry foam type and steam suction type. The steam-jet suction type has strong ability and good decontamination effect. The disadvantage is that it is destructive and rough to operate. The dry foaming method is simple to operate, causes little damage to the carpet, and achieves excellent results. It has two types: roller brush type and rotating brush type.

Advantages of carpet cleaning machine

1. Three-in-one, high work efficiency.

2. It dries quickly and can be used immediately.

3. Lightweight and flexible, easy to use in guest rooms and other places.

Benefits of quick drying:

1. Quickly open cleaning areas and carpets.

2. Clean frequently to improve the appearance of the carpet.

Benefits of saving 70% of water:

1. Use the same water.

2. Reduce the frequency and workload of adding and draining water.

Uses of carpet cleaning machine

Using foaming technology, three effects in one, it can be put into use immediately, which can meet the needs of carpets and last for a long time. Suitable for hotels, restaurants, office buildings and other carpet laying places as well as cleaning companies.

Carpet cleaning machine operating methods and precautions

1. Install the main unit, operating handle, water tank and cleaning brush.

2. The voltage is 220 to 240 volts. Inappropriate voltage may cause abnormal operation or even burnout.

3. An appropriate amount of detergent aqueous solution can be added.

4. Adjust the operating handle to the angle you are accustomed to operating.

5. Hold the operating handle with both hands before starting, and do not stand next to anyone to prevent injuries.

6. Release the power switch handle and it will stop working.

7. Do not operate in rainwater, as it may cause electric leakage or burn out the machine.

Carpet cleaning machine maintenance

1. If the motor does not rotate, the power cord is not connected properly or the fuse is broken. If there is no power, check the power cord connector and fuse, and replace them in time.

2. Disconnect the power switch after starting. If the motor does not stop rotating, the power switch is damaged and the power supply should be replaced immediately.

3. If the motor is stuck, makes abnormal noise, is abnormal, overloads, etc., the gear must be replaced.

Carpet cleaning machine care and maintenance

1. Prevent water or detergent from entering the power plug or the body during use, which may cause accidents such as short circuit or electric shock.

2. The capacitance and withstand voltage are not consistent with the original machine. Capacitors cannot be used to replace running or starting capacitors, which may easily damage the motor.

3. Do not use cracking handles, pull rods or push buttons to avoid unnecessary damage.