What are the methods and precautions for cleaning hotel carpets?

(1) Preventive cleaning: laying doormats and placing ashtrays and trash cans.

(2) Daily cleaning: (vacuuming, removing large pieces of garbage)

In the process of maintenance, vacuuming is an important part. Therefore, dust, sand, etc. should be sucked off with a vacuum cleaner every day. If it is a big piece of paper, toothpick, fruit shell, etc. You should clean it with a garbage shovel and a small brush first, and then clean it with a vacuum cleaner, so as to prevent the throat of the vacuum cleaner from being blocked or beneficial objects such as toothpicks from piercing the dust bag. If there is a lot of water, replace it with a water collector or washing machine in time to prevent the dust collector from absorbing water and damaging parts. In crowded corridors, vertical roller vacuum cleaner should be used to vacuum, and the effect is more ideal, because it can suck away the dirt and sand hidden at the bottom of the fiber and restore the original softness.

(3) Remove stains (local routine maintenance)

No matter what kind of texture it is, it should be removed immediately if it is polluted. If it is completely cleaned, the stain will spread or penetrate into the fiber. Cleaning stains in time can reduce the degree of damage and bring convenience to future cleaning.

2. Carpet cleaning methods and skills 2

Use of cleaning agents and tools:

(1) First, vacuum thoroughly with a vertical vacuum cleaner. (If there is no vertical dust collector, you can use an ordinary drum dust collector).

(2) Remove obvious stains first. (Except water-soluble, oil-soluble and colloidal stains)

(3) Install the liquid medicine box on the sweeper, and pour the dry bubble solution mixed with water into the box. It is best to install an electronic bubble box to reduce the water content of foam.

(4) Push the sweeper into the innermost part of the place to be cleaned, plug in the power cord plug, debug the lifting rod of the sweeper (adjust the position to a position suitable for your own operation), then start the machine to scrub by overlapping one third in each row from indoor to outdoor, move the machine from left to right, and then move it to another row from right to left, and repeat the above operations until the overall scrubbing is completed.

(5) Push the machine aside and remove the brush head. (Unplug the power plug before stopping the machine) Don't let anyone step on it or anything on it before it dries. At the same time, blow dry and turn on the air conditioner to speed up the drying.

Note: All machines should check the power cord, plug and switch before use. Unplug the power supply after the machine is turned off. If you stop using clean towels, please rinse the parts that have been exposed to chemicals with clean water and put the machine back in a damp place.