Safety measures of hotel land reclamation

Building projects often leave a lot of garbage and dirt in construction or decoration, and cement slurry, paint, glass glue, rust and so on will be left on various floors and walls. All this dirt must be cleaned up during land reclamation. Land reclamation cleaning is an initial cleaning project before real fine cleaning, and now most of it will be completed together with fine cleaning. Therefore, land reclamation cleaning is the hardest, most complicated and most troublesome cleaning work. The quality of land reclamation and cleaning directly affects the quality of building cleaning in the future, so it is very important to do a good job of land reclamation.

Second, the construction procedures of land reclamation and cleaning

1. Preparation tools and chemicals: high-power vacuum cleaner, multifunctional floor wiper, glass set tool, telescopic rod, bucket, marble spatula, scraper and sprinkler; Universal cleaning agent, glass cleaning agent, ceramic cleaning agent, detergent, acid cleaning agent, toilet cleaning agent, stainless steel cleaning agent, stainless steel brightener.

2. Clean up decoration garbage, cement slurry, paint, glass glue, rust, etc. Land reclamation site left over;

2. Thoroughly vacuum with a high-power vacuum cleaner,

3. Cleaning the glass: first clean the glass frame with a towel, then scrape off the diluted glass solution with glass, evenly smear the glass from top to bottom, then repeat the above procedures, scrape it with a glass scraper from top to bottom, and wipe off the water mark left on the frame with a dry towel. The water mark on the glass must be scraped clean with glass, otherwise it will leave a mark on the glass.

4, bathroom cleaning: first of all, we must recognize the material of the bathroom ceiling, whether it is PVC board or aluminum-plastic board, different materials use different cleaning methods; Clean the bathroom wall with a brush, focusing on cleaning the cracks of ceramic tiles and the glue marks and cement stains left on the surface of ceramic tiles; Wash the sanitary ware in the bathroom with a towel, and clean all kinds of faucets with stainless steel cleaning solution; Use the washing machine to clean the floor, and use cleaning balls and blades to clean the corners that the washing machine can't wash.

5. Cleaning of the kitchen: the construction procedure is the same as that of the bathroom. Because there are many stainless steel pipe fittings in the kitchen, the focus should be on cleaning stainless steel pipe fittings.

6. Bedroom and hall: dust the walls with a vacuum cleaner, suck up dust from top to bottom with a row of suction ports, and wipe lamps, switch boxes, smoke exhaust devices, air conditioning ports and exhaust ports.

7. Cleaning of doors and doorframes: First, distinguish the materials of doors, dilute them with professional cleaners, and wipe them from top to bottom. Fold the towel into a square and wipe it from left to right above the door. Where there are glue stains, you can use glue remover to deal with them, so as to ensure that there are no omissions and no dead ends.

8. Floor cleaning: After the above cleaning work is completed, the floor will be cleaned. The ground should also be divided into materials, whether it is wooden floor, ceramic tile floor or stone floor. After distinguishing the materials, select a special cleaner to dilute in proportion and start cleaning. Glue stains on the ground can be removed with a blade, and stubborn ones can be treated with glue remover; After the last working procedure is completed, it should be thoroughly inspected to confirm that there is no residue.

9. Corner line: Wipe with a towel, and remove all kinds of glue marks and paint spots on the skirting line with a blade.

Three, land reclamation and cleaning matters needing attention:

1. Many stone materials, such as marble, granite, stainless steel equipment, etc., cannot use corrosive cleaning agents such as strong acid or alkali, which will lead to discoloration or deformation of these substances;

2, clean sanitary ware, marble countertops, etc. Hard objects such as blades cannot be cleaned with steel balls to avoid scratching the surface;

3. Whether it is a solid wood floor or a floor, don't get too much wet water when cleaning, otherwise it will easily cause the wooden floor to deform;