Hotel guests

Once there is a problem of water seepage on the wall, it may lead to cracking and mildew on the wall, which will bring various inconveniences to daily home life. Therefore, when there is water seepage in the wall, measures should be taken immediately to deal with it.

So what is the reason for the wall seepage? How to solve the problem of wall seepage?

How to deal with wall seepage, how to deal with why wall seepage.

1, there was no insulation layer in the past, and many residential walls did not have insulation layer. In winter, the temperature difference between indoor and outdoor is large, so it is cold outside the wall and hot inside.

Because of the high temperature, the inner wall will produce condensed water, which will cause the wall to be wet and the whole wall will be wet. This usually only happens in winter and summer. It will be fine, but the consequence is that many ugly mildew spots will be left, which will affect the aesthetic feeling of the wall.

2. The wall leaks, and the wall is wet due to the leakage of the embedded water pipe.

Generally speaking, this kind of situation mostly occurs near the bathroom, and there is leakage on the roof or wall of the house, including whether there is leakage or not. Water seepage in the wall, upper water pipes and partition walls of the house.

3. Poor waterproof measures. 1 The waterproof decoration works at the bottom of the floor were not done, resulting in wall leakage. The waterproof floor upstairs is not ready, and the bathroom next door is still

The floor of the bathroom next door is not very waterproof. Once there is water in the bathroom, it will slowly penetrate. The joint between the water pipe and the ground on the second floor is not waterproof. There is likely to be water seepage near the pipeline.

Water will flow down the pipe, causing the roof to leak.

4, paint decoration decoration engineering paint decoration engineering is improper, when the wall is painted, the first wall paint is not dry, and the wall paint is started, and the water vapor in the wall does not evaporate, resulting in the wall being wet.

How to deal with wall seepage

1, directly replace or repair water pipes. If it is a water pipe, it can be replaced, or it can be temporarily repaired with special tape.

The specific operation method is: first close the valve, cut off the water source, open the faucet to a suitable position, and discharge most of the pressure in the water pipe, and then tie the leaking part firmly with special adhesive tape or ring resin glue. Life.

2, contact the property, but involves the external wall problem, it is best to reflect to the property, and contact the property decoration engineering department for maintenance.

3. The boss who leaks waterproof paint at home can buy waterproof paint to stop the water and brush the bathroom walls and floors himself. The best way is to ask the decoration workers to solve it, which is more professional and effective.

Or a little troublesome and waterproof.