How to deal with the problem of bed ringing

According to the noise, find the source of the noise. If the rivet connection makes noise, it may be that the rivet is loose and causes creaking, so we can re-nail the rivet; If it is not a rivet, it can be fixed with a triangle, because the stability of the triangle is very good.

Or sprinkle talcum powder on the joints and rivets of the solid wood board to lubricate it, so that the solid wood board will naturally not make noise, but don't use oil, which will make the bed board greasy and the sheets covered with oil, which is difficult to clean.

There is another way, that is, use a solid wood wedge to plug into rivet holes or the joints of solid wood boards and let them press tightly, so that there is no way to make noise because of shaking.

Cause analysis of bed squeaking

1, decoration problem. The bedside may not be against the wall, and the newly built houses are basically attached with skirting lines, so even if the foot of the bed is next to each other, there will still be gaps on it. In this case, you can put a wooden square behind the bedside, so there is no gap, so the bed will not creak.

2. The structural problem of the bed itself is generally that the installation is not in place or the wooden screws are loose. Generally, the four corners of a wooden bed are fixed with screws. If you often toss and turn in bed, it is easy to cause the screws to loosen, and it will make a creaking sound after a long time, so you can tighten each nut with a wrench in this case.

3. The squeak comes from the bed board. The bed board is placed on the bracket in the bed. Check whether the bracket joint is loose (generally no problem). The reason why most bed boards make noise is that many combined bed boards are too thin. People lying on it will make noise as long as they turn a little, mainly because the boards are unevenly stressed and rub against each other. The solution is to add some cross materials on the back of the bed board and nail them firmly, which can basically solve the problem.