What is a partition? What are the precautions for wallboard installation?

Clapboard is becoming more and more popular in the decoration market. Many kindergartens and children's leisure clubs will use partitions, which can not only avoid messy walls, but also protect children from tripping. However, now, wallboard has become the main force in the field of decoration design. It can be seen that many single-family villas or high-end hotel restaurants choose wallboard as decoration. What is this? What are the precautions for wallboard installation? Take a look with us ~

What is a partition?

1, some parts of the dado are also called board walls or walls. The dado decorative board is the raw material of a new decorative pattern wall developed in recent years, which has the characteristics of fire safety, insect prevention, simple engineering construction, low engineering cost, safe use, obvious decorative modeling and convenient maintenance. It can not only replace wooden dado, but also replace wallpaper, wall tiles and other wall materials, so it is widely used.

2. Generally, wood is used as the base material of wallboard, and the surface is treated by sanding, polishing, scraping, pouring oil, packaging, printing wood grain and other processes to form several color patterns such as imitation solid wood, imitation ceramic tile and imitation stone.

3. The partition is convenient to maintain, good in practicability and remarkable in decorative modeling. It will be unique to choose different colors and patterns of partitions according to your own and your family's hobbies. A house with wallboard will be hot in Leng Xia in winter, and the wood itself can adjust the relative humidity of the air in the house. It has strong thermal insulation performance, but the disadvantage of wallboard is poor moisture resistance.

4. Partitions include solid wood partition, FRP anticorrosion partition, plastic all-ceramic veneer partition and laminated plastics partition, among which solid wood partition is the most widely used in home decoration.

What are the precautions for wallboard installation?

1. Prepare and check before installation. Before the plate is installed, it is necessary to accurately measure the specifications in advance, and then design the size of the layer. If necessary, you can try it out and make some adjustments to avoid the problems of uneven color and irregular joint area during installation.

2. Keep the walls clean and tidy. The walls must be kept clean and flat. If there are uneven places, the wall should be leveled to avoid endangering the actual installation effect.

3, the moistureproof treatment of metope, generally wood moisture content is high, and the moisture content is relatively large, if dry manic, moisture content is reduced, there may be a joint is not tight or cracking phenomenon, so to ensure that wood and metope dry manic, waterproof treatment measures at the same time.

4. Leave a gap outside the control panel and a gap outside the panel wall. The total width of the gap must be symmetrical and consistent, and the deviation of each width should be particularly small.

5. The outer corner line should be horizontal and vertical. The installation problem of wallboard is its external angle line, so we should pay attention to ensure the level and straightness of external angle line.

6. Footing lines and battens must be close to the control panel, and they should be close to the control panel, and there should be no big gap. Steel nails are needed to fix the fixed cornerstone and batten, and the interval between steel nails should not exceed 30cm.

7. Prevent chaotic patterns, uneven colors, bent corners, uneven surfaces, black lines at interfaces, and loose joints. The key lies in the careless selection of fabrics and careless actual operation. The types, colors and lines of wood used in a room should be consistent: before the control panel is installed, the layered specifications should be designed, and each piece should be straightened and tried once, and then the nailing should be announced after adjustment and maintenance.

8. Prevent the structural columns of wallboard from being different in size, uneven and broken. : It may be due to negligence in choosing wooden strips with the same size and similar color. Before operation, use messenger wire to check whether the top of the clapboard is vertical, and correct it in time if there is any problem.

9. Prevent uneven or cracked connectors, which may be caused by the shrinkage of wood after drying due to its high water content. The main reasons for unevenness are usually because the steel nails are too small, the nail spacing is too large, and the glue adhesive leaks.