How to set the fingerprint lock after unlocking?

Guide to setting fingerprint lock during the meeting: first check the paper manual or open the battery cover and scan the QR code to read the manual or instructions for use.

* key to return to the previous step, # key to confirm.

1: Enter the system mode: wake up the screen first, the most commonly used is * #, followed by 0#, and a few are long press # or long press * or 1# or 00#.

2. How to restore the factory settings: semi-automatically, take the needle to find the small hole in the middle of the backboard and poke it for 5-8 seconds. When you hear about restoring factory settings, you can also find the restored factory settings in the system settings in a fully automatic way. After recovery, the initial password is 123456 or 12345678 (if the new lock is not obtained with these two passwords, it may be

3. Administrator settings: first set the administrator (1 password+1 fingerprint, it is best not to set more than three administrator passwords), and then set the ordinary users. Some items need to press # to confirm the user number, and then enter the fingerprint, password and magnetic card.

4. WIFI settings for distribution network: Some are in the system settings (look carefully), and others press other buttons (for example, Long March face intercom or Phantom is to press 1# to enter the distribution network).

5. Full-automatic door opening direction: 888+# is mostly entered in the initialization state. If you have entered your fingerprint or password, please initialize the system and there is a small hole on the panel. Hold the needle for 5-8 seconds, and press * to exit when you see the left number key turn right. Some styles are to enter the system first, find the system settings, find the direction of opening the door, and then adjust the left and right directions. Some styles are 3 or 5+#.

6. Torque of motor: some are adjusted within 888+#, and some are adjusted within system settings. Generally, if the lock body is flexible manually and does not need to be adjusted, it will increase power consumption;

7. Automatic locking function: it is generally adjusted in the system (note: use it with caution at the seaside or in the corridor of windy houses, because there may be sudden strong wind, and the insurance has been released, which will damage the lock body.