8 Purchase and sale contract template

Purchase and sale contract template 1

I. Supplier: (hereinafter referred to as Party A) Demander: (hereinafter referred to as Party B)

2. The bu

Purchase and sale contract template 1

I. Supplier: (hereinafter referred to as Party A) Demander: (hereinafter referred to as Party B)

2. The buyer shall purchase the following products from suppliers: materials for product tracking and after-sales service.

Three. Supplier's account information:

Payee: Information Technology Co., Ltd. Payee AccountNo.: Bank of deposit:

Four, technical standards:

Verb (abbreviation of verb) product acceptance:

Original manufacturer's standard.

Product quality objections should be raised within three days after the arrival of the goods at the station (port), and proof of the arrival date should be provided. Overdue is regarded as acceptance.

Six, after-sales service:

VII. Place of delivery:

The supplier shall provide free product upgrade service for one year from the date of installation. The supplier shall deliver the goods to the domestic location designated by the buyer within three days after receiving the advance payment from the buyer.

Eight. Term and method of payment: after signing the contract, pay RMB xx in advance. Pay the balance of the contract within one week after the installation and debugging of the arrival system is completed, that is, RMB xx Yuan only.

Nine. Liability for breach of contract:

X. dispute resolution methods:

XI。 Others:

Comply with the relevant provisions of the agency agreement and the contract law.

The two sides should negotiate amicably. If negotiation fails, it can be submitted to Shanghai Arbitration Commission for arbitration. This contract is made in duplicate, one for each party. This contract shall come into effect as of the date of signature and seal by both parties, and the fax of the contract shall be valid.

Party A (official seal): _ _ _ _ Party B (official seal): _ _ _ _ _

Legal representative (signature): _ _ _ _ _ Legal representative (signature): _ _ _ _ _

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Purchase and sale contract template 2

Supplier: _ _ _ _ _ _ _ _ _ _ Demander: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

1. Product name, trademark, model, manufacturer, quantity, amount, delivery time and quantity.

Contract number:

Signing place:

Date of signature: year month day.

Product name, brand, trademark specification, model, manufacturer's unit quantity, unit price and total

golden

The total delivery time and quantity is RMB (in words).

(Note: If there is not enough space, you can connect separately. )

Two. Quality requirements, technical standards, conditions and deadlines for suppliers to be responsible for quality-

Three. Place and method of delivery (delivery)

4. Mode of transportation, arrival at port and expenses-

Verb (abbreviation of verb) reasonable loss and its calculation method-

The packaging standard of intransitive verbs, the supply and recycling of packaging-

Seven. Acceptance criteria, methods and time limit for raising objections-

Eight. Quantity and supply mode of spare parts, accessories and tools-

Nine. Settlement method and time limit-

Ten, if you need to provide a guarantee, a separate contract guarantee, as an annex to this contract.

───────────────────────────────────────────────────?

XI。 Liability for breach of contract —————————?

Twelve. Ways to resolve contract disputes-

Thirteen. Other agreed matters ———————————?

Supply side and demand side

Company Name (Seal) Company Name (Seal) Certificate (Notarization) Comments:

Company address: Company address:

Legal representative:

Authorized Agent: Authorized Agent: Agent:

Tel: Tel: Certification Body (Seal)

Telegram registration: Telegram registration: year month day.

Bank of deposit: Bank of deposit: (Note: Unless otherwise stipulated by the state.

Account number: account number: abroad, and the realization of authentication (public) certificate.

Postal code: postal code: voluntary principle)

Validity period: year month day to year month day.

Producer: Printing unit:

Purchase and sale contract template 3

Supplier: (hereinafter referred to as Party B)

In order to protect the legitimate rights and interests of both parties, according to the Contract Law of People's Republic of China (PRC) and relevant laws, the parties agree to sign this contract according to the following terms through friendly negotiation.

I. List of Goods:

Payment of decoration materials and decoration balance

Two. Total contract amount: (RMB) 1769000.00 Yuan, in words: RMB one million seven hundred and sixty-nine thousand Yuan only.

Three. Payment terms:

1. Contract deposit: 10% of the contract amount shall be paid at the time of signing the contract, and production shall be carried out after the advance payment is paid, totaling 1592 100 yuan.

2. Party A shall deposit the money into the account designated by Party B (as follows).

Account name: Sun xx

Bank of deposit: xxxx Zhongguangcun Sub-branch

Account number: 62 62 62xxxxxxxxxx64755

The ownership of the goods is transferred when the buyer pays off all the payment.

Four. Delivery time: payment to delivery.

5. Delivery place: Room 4 146, Floor 4, Building 3, Yard 2, Lugouqiao Nanlijia, Fengtai District, Beijing.

Contact person and method:

6. Mode of transportation: The transportation in Beijing shall be borne by the supplier, and the freight and insurance outside Beijing shall be borne by the buyer.

Seven, quality assurance:

The supplier will provide product warranty service according to the warranty period and warranty terms in the attached list of goods.

Eight, the goods receiving and acceptance:

1. When the supplier delivers the goods to the designated place according to the delivery time stipulated in the contract, the buyer must provide the assembly site. If the assembly site cannot be provided, the buyer shall receive and properly keep all the goods. At the same time, the buyer pays 5% of the total contract price.

2. The buyer shall complete the acceptance within three days after assembly (paint products shall be accepted after assembly). If there is any objection, it should be submitted to the supplier in writing within this period. If the buyer fails to accept the goods within this period, it will be deemed as qualified.

Nine. Liability for breach of contract:

If the supplier is unable to deliver the goods due to force majeure (such as earthquake, flood, wind disaster, etc.). ), 0.5 ‰ of liquidated damages shall be paid according to the undelivered part.

X. In case of litigation related to this contract, both parties shall settle it through consultation; If negotiation fails, both parties agree that the court where the supplier is located is the court of first instance.

XI。 This contract is made in duplicate, one for each party.

Twelve. This contract shall come into effect after being signed (sealed) by both parties. The signed (sealed) copy of this contract has the same legal effect as the original.

13. Our products are guaranteed for five years. During normal use and warranty period, if the product is damaged, our company will actively and responsibly take necessary remedial measures to safeguard the consumer rights and interests of customers.

Party A (official seal): _ _ _ _ Party B (official seal): _ _ _ _ _

Legal representative (signature): _ _ _ _ _ Legal representative (signature): _ _ _ _ _

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Purchase and sale contract template 4

Party A:

Party B:

According to the Contract Law of People's Republic of China (PRC), Party A and Party B, based on the principles of friendship, equality and mutual benefit, have reached the following terms on the purchase and sale of exhibition handicrafts through consultation:

I. See the attached table and attached drawings for the list, specifications and shapes of various handicrafts listed in this contract.

Second, the contract price:

The handicrafts listed in this contract are RMB * Yuan only, and the detailed price is attached.

Third, packaging and transportation:

Party B must package the contract goods in a way that will not be damaged during transportation, and bear the packaging expenses. Party B shall bear the transportation expenses of the goods and the damage during transportation.

Fourth, the acceptance method:

According to the handicraft industry standard (if there is no industry standard, it shall be accepted according to the manufacturer's process standard), because the subject matter of this contract is handmade, the actual goods supplied are inevitably different from those shown in the attached drawings, and the actual goods on site shall prevail during acceptance.

Verb (abbreviation for verb) payment:

1. Within 7 days after the signing of the contract, Party A shall pay Party B 50% of the total contract price, that is, RMB * Yuan only (RMB * Yuan) as advance payment.

2. Based on the principle of cash on delivery, Party A shall pay the balance, i.e. 50%* yuan (RMB * yuan) of the contract price, within 7 days after all the subject matter is accepted on site.

Six, delivery rules:

1. Delivery place: the delivery place agreed by both parties is.

2. Delivery method: on-site delivery at the hotel.

3. Delivery date: within 30 days after signing the contract.

4. Transportation expenses: borne by Party B..

Seven. Responsibilities, obligations and rights of both parties

1. If Party A changes the specification and shape of the subject matter during the execution of the contract, it shall obtain Party B's consent and negotiate with Party B to determine the change price before making the change, otherwise it shall bear all the responsibilities arising therefrom.

2. Party B must ensure timely delivery. If it fails to deliver the goods within the agreed time, it shall obtain the consent of Party A. If the delivery time is extended without the consent of Party A, it shall bear the responsibilities arising therefrom.

3. If the specification and shape of the subject matter do not conform to the provisions of this contract due to Party B's reasons, Party B shall replace it; If Party B provides a substitute product, its quality grade should be equal to or higher than the subject matter agreed in the contract, otherwise it will not be recognized.

4. Party A shall pay the contract price on time. If the payment cannot be made on time due to Party A's reasons, the delivery date of Party B shall be postponed to the first day after payment.

5. After the subject matter arrives at the site and is accepted by Party A, Party A shall not replace it for any reason. If the subject matter is replaced due to Party A's reasons, Party A shall increase the payment for the replacement part and postpone the delivery date of the replacement part for 30 days.

6. Either party shall not change or modify the terms of this contract without authorization. If it is really necessary to modify, the changing party must sign a supplementary agreement with the interested party, otherwise all losses caused shall be borne by the changing party.

Eight. Settlement of contract disputes: in case of contract disputes, both parties shall settle them through consultation; If negotiation fails, bring a lawsuit to the court where Party B is located.

Nine. Agreement on matters not covered:

Matters not covered in this contract shall be supplemented by both parties through consultation. Supplementary terms have the same legal effect as this contract in the form of annexes, and the terms that conflict with this contract shall prevail.

X. Number of contracts, entry into force and termination

This contract is made in duplicate, one for each party. It will take effect after being signed and sealed by both parties, and will automatically become invalid after the performance is completed and the payment is made.

Party A (official seal): _ _ _ _ Party B (official seal): _ _ _ _ _

Legal representative (signature): _ _ _ _ _ Legal representative (signature): _ _ _ _ _

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Purchase and sale contract template 5

Supplier (hereinafter referred to as Party A): _ _ _ _ _ _ _ _ _ _ ID number: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

The buyer (hereinafter referred to as Party A): _ _ _ _ _ _ _ _ _ _ _ ID number: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

I. Product specifications and quantity: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Second, manufacturing standards: national standards.

3. Quality inspection: In order to ensure the quality of products, our company conducts inspection in strict accordance with national standards or enterprise standards before leaving the factory.

4. Packing method: ordinary packing.

Verb (abbreviation of verb) Mode of transportation: automobile transportation.

6. Delivery date: within 0/5 days after signing the contract.

Seven. Payment method: pay RMB 10,000 only after signing the contract, and pay the rest in one lump sum after the goods arrive at the site for acceptance.

Remittance data: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _; Account name: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _;

Bank where the company opens an account: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _; Bank account number: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

Eight. Inspection method: The buyer shall complete the appearance inspection within the same day after receiving the products; If it fails to be completed, it will be deemed as qualified. The internal inspection shall be carried out according to the supplier's enterprise standards, and the buyer shall complete it within 65,438+00 days.

Nine. Dispute settlement: Both parties shall settle the dispute through consultation. If negotiation fails, it shall be settled according to the contract law.

X. Liability for breach of contract: If the buyer fails to pay the supplier on time, or the supplier fails to deliver the goods to the buyer on time, the defaulting party will be fined 2.5 ‰ for each overdue day.

1 1. Quality assurance: Three guarantees are provided for the qualified products that meet the national standards and enterprise standards, and the warranty period is 12 months from the date of installation and commissioning or 18 months after arrival (whichever comes first). However, in case of typhoon, earthquake and other force majeure events, the company does not assume warranty responsibility.

12. Before the buyer pays off the payment, the ownership of the product belongs to the supplier.

Thirteen. Method of guarantee: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

Fourteen This purchase contract was signed on _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

Party A (official seal): _ _ _ _ _ _ _ _ _ _ _ Party B (official seal): _ _ _ _ _ _ _ _ _ _ _ _

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

Purchase and sale contract template 6

Supplier:

Demand side:

In order to clarify the rights and obligations of both parties, Party B purchases steel from Party A for the needs of engineering construction, and the following terms are reached through equal and friendly negotiation between both parties.

1. The total amount of engineering reinforcement is about tons, with specifications and models of round steel 10 and12; Rebar 14, 16, 22.

2. All steel required for Party B's engineering construction shall be purchased from Party A. Without Party A's written consent, Party B shall not purchase steel from other channels, otherwise, Party B shall pay a penalty of RMB 10,000 Yuan only to Party A, and pay off all arrears at the same time. Party A has the right to terminate the contract unilaterally.

3. When Party B purchases the required steel from Party A in stages and batches according to the needs of the project progress, it shall inform Party A of the specifications, models and quantities of the required steel four days in advance, and Party A shall deliver the steel to Party B's site within days after confirmation by Party A.. If Party A fails to deliver the goods to Party B within the time limit, Party A shall compensate Party B for the liquidated damages of three thousandths of the current payment.

4. Calculation method: The weight of wire shall be subject to weighing, and the reinforcement shall be calculated according to the theoretical weight of point reinforcement.

5. As the steel market price changes frequently, it is determined by both parties through friendly negotiation. Theoretically, the rebar order is RMB per ton (excluding tax), the wire rod is weighed RMB per ton (excluding tax), and the package tax is increased by 17%. If the market price fluctuates greatly on the delivery date, both parties can renegotiate the price.

6. Acceptance method of steel: Party B shall conduct inspection after receiving the goods, and it can only be used after it is qualified. If there are any quality problems, Party A shall be notified in writing within _ _ _ days from the date of receipt of the goods, and relevant inspection reports shall be submitted, otherwise the quality of this batch of steel shall be regarded as completely qualified. If both parties disagree with the inspection results, they may entrust a nationally recognized quality supervision institution to conduct another inspection. After both parties confirm that the steel quality is indeed unqualified, Party A shall transport the unqualified steel back and bear all expenses arising therefrom.

7. Payment method: After Party A transports the goods to the construction site, Party B must pay all the payment for steel products in the current month within days. If Party B fails to pay the steel payment in full and on time, Party B shall compensate Party A with a penalty of 0.3 ‰ of the total amount owed (calculated from the delivery date) every day.

8. Both parties shall strictly abide by this contract. If there is any dispute between the two parties, it should be settled through consultation first. If negotiation fails, it shall be submitted to the people's court where the project is located for adjudication.

9. This contract is valid for years and shall come into effect after being signed by both parties.

10. This contract is made in duplicate. Party A and Party B each hold one copy.

Party A: Party B:

Representative of Party A: Representative of Party B:

Date of Contract Signing: Date of Contract Signing:

Purchase and sale contract template 7

Party A (demander):

Party B (supplier): Signing place: Signing time:

According to the Contract Law of People's Republic of China (PRC) and relevant laws and regulations, Party A and Party B, on the principles of equality, voluntariness, honesty and credibility, entered into this contract through friendly negotiation and kept it in good faith. Sign the following contracts:

I. Product Name Log, Mining Log and Mining Log Unit Price 1 100/ m3.

Second, quality standards: according to industry standards.

Three. Conditions and time limit for the seller to be responsible for the quality: the buyer shall inspect the products after they arrive, and the seller shall be responsible for the quality problems of the products.

Four. Delivery method and place (delivery place): Party A's company.

Verb (abbreviation of verb) Mode of transportation, arrival station (port) and expenses: The transportation expenses shall be borne by the seller.

VI. Packaging Standards and Packaging Disposal: Standards

7. Inspection standard, method, place and time limit: The quality inspection shall be carried out according to the requirements of the buyer.

8. See the attached table for the quantity, variety and price of the goods.

Nine, reasonable loss standard and calculation method: standard

X. Settlement method and time limit: the total price of materials shall be paid after the buyer's acceptance.

XI。 Conditions for dissolution and termination of this contract: execution of contract law.

Twelve. Liability for breach of contract: If the buyer breaches the contract, the seller has the right to terminate this contract and implement it according to relevant agreements.

Thirteen. Settlement of contract disputes: in case of disputes arising from this contract, both parties shall settle them through consultation; If negotiation fails, bring a lawsuit to the people's court of the place where the contract is signed.

14. This contract shall come into effect after being signed and sealed by both parties.

Fifteen. Other agreed matters.

Party A (demander): Party B (supplier):

Signature signature

Purchase and sale contract template 8

Buyer (Party A):

Seller (Party B):

Through friendly negotiation, both parties reached the following agreement on purchasing office supplies and consumables from Party B:

1. Party A purchases office supplies and consumables from Party B. See the purchase list for details. Party B provides services such as delivery and after-sales return to Party A free of charge.

2. Party B shall provide Party A with the lowest preferential price among the same commodities. See the list for specific prices. The price adjustment can only be implemented with the written consent of Party A. ..

3. The delivery time is generally one working day or the time required by Party A in the order. If Party A has an urgent order for goods, the ordered goods will be delivered to the designated place in the shortest time.

Four. After the office supplies are delivered to Party A, Party A and Party B shall jointly count the quantity. In case of quality problems in use, Party B shall still be responsible for replacement or return, or give price discounts according to Party A's requirements.

5. Within working days after the end of each month, Party B shall provide the invoice and delivery note signed by Party A, which shall be settled once a month according to the actual amount after being confirmed by Party A. ..

6. Party B guarantees that all the goods provided are original products, and the quality meets Party A's requirements and relevant quality standards. Otherwise, Party A has the right to return the goods.

7. Party B shall provide a valid contact person and telephone number, and inform Party A of any change in time.

8. If Party B fails to provide the goods within the specified time or the goods provided are defective, Party B shall bear the liability for breach of contract in RMB every time and compensate the losses caused to Party A.. ..

Nine. Other agreements

1. Any dispute arising from the execution of this contract shall be settled by both parties through friendly negotiation. If negotiation fails, it shall be submitted to the court where Party A is located.

2. This contract shall come into effect as of the date of signing and shall be valid for one year; This contract is made in duplicate, with the same legal effect.

Party A: Party B:

Company address: Company address:

Authorized representative: authorized representative:

Fax: Fax:

Tel: Tel:

Date of signing:

Procurement contract mode of office consumables II

Party A: (Buyer)

Party B: (supplier)

Article 1 the subject matter of the contract

Party B shall provide the following goods according to the requirements of Party A: See the contract number for the name, specifications and quantity of the goods. In the "tender quotation sheet".

Article 2 Total Contract Price

1. What is the total price of the goods under this contract? (in words) RMB, and the itemized prices are listed in the "Bid Quotation Form".

2. The total contract price refers to all spare parts expenses including tax before the design, manufacture, packaging, storage, transportation, installation and acceptance of the goods and during the quality guarantee period.

3. The total contract price also includes the accompanying service/after-sales service fees that Party B should provide.

Article 3 Relevant documents constituting this Contract

The following procurement documents and related attachments related to the number of the procurement office are an integral part of this contract and have the same legal effect as this contract, including but not limited to: (1) the quotation documents (quotations) provided by Party B; (2) technical specification response table; (3) service commitment; (4) Other documents agreed by both parties.

Article 4 Quality Assurance

Party B shall guarantee that the goods are brand-new, unused, original, qualified and authentic, and fully meet the quality, specifications and performance requirements stipulated in the contract. Party B shall ensure that the goods it provides have good performance within its service life under the conditions of correct installation, normal use and maintenance.

Article 5? Delivery and acceptance

1. Party B shall deliver the goods to Party A in the time and manner specified in this contract or the tender documents. The place of delivery is:

Contact:?

Telephone:

2. Delivery time: So Party B should be in 200 months? Delivered the goods to Party A a few days ago.

3. The goods delivered by Party B shall fully meet the requirements of goods, quantity and specifications specified in this contract or bidding documents.

4. After the goods arrive, Party A shall? Check and accept the goods within working days, including: model, specification, quantity, appearance quality, whether the goods packaging is intact, whether the installation and debugging are qualified, whether the user manual, original factory warranty card, random materials and accessories and random tools are complete.

Article 6? Accompanying service/after-sales service

1. Party B shall provide services in accordance with relevant national laws and regulations, Three Guarantees and the "Service Commitment" attached to this contract.

2. All goods warranty services shall be guaranteed by Party B at home, and Party B will send personnel to the goods use site for maintenance, and all expenses incurred shall be borne by Party B. ..

Article 7 Payment for goods

Party A shall pay the payment within 15 working days after receiving the inspection list provided by Party B and the copy of the invoice stamped by the user.

Article 8? responsibility for breach of contract

1. If Party A refuses to receive the goods or refuse to pay the goods without justifiable reasons, Party A shall pay Party B a penalty of 5% of the total contract price.

2. If Party A fails to pay the payment to Party B within the time limit stipulated in the contract, Party A shall pay 5‰ of the total overdue payment to Party B every 1 day, but the accumulated total overdue payment shall not exceed 5% of the total arrears.

3. If Party B fails to deliver the goods, Party A has the right to detain all the performance bond; At the same time, Party B shall pay Party A a penalty of 5% of the total contract price.

4. If Party B delays the delivery, Party B shall pay Party A 5‰ of the total delayed delivery price for each delay 1 day. If Party B is overdue for (10) days, Party A has the right to terminate the contract, and the notice of termination shall take effect as of the date it is delivered to Party B. ..

5. If the varieties, models and specifications of the goods delivered by Party B are inconsistent with the contract, Party A has the right to reject them. If Party A refuses, Party B shall pay Party A a penalty of 5% of the total payment. If it is found that the supplied goods or their parts are fake and inferior products, Party B will unconditionally return or exchange them, and will deduct the performance bond of less than 2000 yuan from the procurement office according to the seriousness of the case.

6. Within the quality guarantee period promised by Party B or stipulated by the state (whichever is the longest), if the goods still fail to meet the quality standards agreed in the contract after being repaired or replaced twice by Party B, Party A has the right to return the goods, and Party B shall refund all the payment, and deal with it according to Paragraph 3. At the same time, Party B shall compensate Party A for the losses suffered as a result.

7. If Party B fails to provide accompanying services/after-sales services in accordance with the provisions of this contract and the "Service Commitment", Party B shall be liable for breach of contract to Party A at 5% of the total contract price.

Article 9? Settlement of disputes

1. In case of disputes over the quality of goods, a nationally recognized quality inspection agency shall be invited to appraise the quality of goods. If the goods meet the standards, the appraisal fee shall be borne by Party A; If the goods do not meet the quality standards, the appraisal fee shall be borne by Party B. ..

2. Any dispute arising from or related to the performance of this contract shall be settled by both parties through friendly negotiation. If no settlement can be reached through negotiation, the case shall be submitted to Nanjing Arbitration Commission for arbitration according to its arbitration rules.

Article 10? Entry into force of contract and others

1. This contract shall come into effect as of the date of signature.

2. This contract is in quadruplicate.

3. This contract shall be interpreted according to the existing laws of People's Republic of China (PRC).

Party A (seal): Party B:

Person in charge: legal representative:

Address: Address:

Postal code:

Tel: Tel:

Email: Email:

Authorized representative (signature): Authorized representative (signature):

Signature time: