Tutorial on how to remove the pure anti-theft buckle

Pure anti-theft buckle can be removed by magnet.

Tutorial on how to remove the pure anti-theft buckle

1. If the buckle is made of iron, you can touch it with a magnet, then pull it hard and take it off in a few hours.

2. Break open the plastic shell with a hammer, and then pick it up and take it off with a knife.

3. Cut the expansion part of the anti-theft buckle with a lighter, then pick it up with a knife, and then remove the remaining steel wire and take it off.

4. Take out the pliers, open one side of the small head of the anti-theft buckle and plug it into the pliers to cut the wire, and it will break when you cut it hard.

Turn the hole a few times with a screwdriver, and it will open in a minute or two.

6. You can cut it from the hole on the side of the road with a screwdriver, and you can take it off in about a minute or two.

Basic information

In the construction industry or lock industry, the security door buckle, also known as the anti-theft buckle, is a kind of metal buckle with inverted buckle installed inside the gate. Mostly used in family doors, hotel doors, etc. , can also be used for family bedroom doors.

The anti-theft buckle is installed on the back of the door, not far from the door. One end of the door buckle is fixed on the door frame, and the other end is movable and can be locked in the base groove on the back of the door. After the anti-theft button is buckled, the door can only be opened to about 5~8 cm at most, so that people can't get through, and their hands can't reach the button behind the door, and the anti-theft button can't be opened, which ensures that the host will not be suddenly attacked by the other party when he opens the door to confirm the identity of the visitor.