Traditional Culture Encyclopedia - Hotel franchise - How to disassemble the hotel electronic lock
How to disassemble the hotel electronic lock
Abstract: Hotel locks are relatively safe and have a certain ability to prevent violent disassembly, but they are not absolutely resistant to violent disassembly. If the hotel electronic lock is used for a long time, it will inevitably be damaged. Therefore, it is necessary to replace the lock with a new one in time to ensure the safety of the house. The method to disassemble the hotel electronic lock is very simple. First, unscrew the screws on the outside of the hotel electronic lock, then pry loose the disc, take out the handle, and then take out the disc and lock body. Next, let's take a look with the editor. How to disassemble the hotel electronic lock
1. The first thing we have to do is to unscrew the screws on the outside of the hotel electronic lock, and then pry the disc close to the door with a screwdriver or other hard tools. Loosen, and finally twist in the opposite direction of unlocking until it retreats to the back.
2. Next we need to twist the door handle in the direction of unlocking. After we see the small hole on it, find a small object and insert it into the small hole to let it act as a support and fixator. function, so that we can quickly pull out the handle part, which can complete the most important step in our lock removal process, and it will be much easier for us to perform the following operations.
3. After removing the handle, we can easily pry the disc that we have just loosened, and then use a screwdriver to remove the screws on it, and then we go to the door. Just pull the lock body out, and we have completed the door lock disassembly process.
Can hotel locks prevent violent disassembly?
Hotel locks are relatively safe. Whether they can prevent violent disassembly depends on how the outdoor panels are fixed. The hotel lock is fixed by screws on the front and rear panels. The lock body inside the door is in the middle of the two panels. The handles of the indoor and outdoor panels are connected to the lock body through square steel. The mechanical ferrule in the ferrule will not be connected to the outdoor panel, otherwise the mechanical ferrule will be taken away when the panel is removed. Therefore, it has a certain ability to prevent violent disassembly, but it is not absolutely resistant to violent disassembly. .
Although there are some differences in the structure of various hotel locks, they all use long screws to clamp the door body between the outdoor panel and an indoor component for fixation. This fixed component may be the interior panel of the hotel lock, or it may be an independent steel plate. However, none of them are fixed through the lock body installed in the door. At most, they are fixed through the holes reserved in the lock body, so that the outdoor panel has only a smaller installation range during installation, so it appears safer.
The electronic anti-theft lock body improves the performance of anti-prying and anti-violent demolition, and the hotel lock has a voice alarm system. As long as someone illegally operates the hotel lock, the hotel lock will sound an alarm when it reaches a certain level, and Lock the fingerprint password lock operating system to destroy the crime environment of criminals.
- Related articles
- Why is it best not to turn off the toilet light when staying in a hotel for the night?
- Are there any interesting tourist attractions in Sanmen?
- How to get to Qingzhou High Speed ??Rail Ju Green Hotel Ancient Song City?
- Founder of Suzhou Yin Zhi Hotel
- Yanliang accommodation
- Where is Shaoxing Yue Xianju?
- What is the most famous snack in Henan?
- What's delicious in Guijie, Beijing?
- What kind of country is Dubai?
- How does the US delegation reserve a restaurant seat?