How to distinguish between dry and wet in bathroom decoration? What are the advantages and disadvantages of dry-wet separation?

The fog in the shower will do harm to many electrical appliances and mechanical equipment in the bathroom. When it is wet and cold, it will short-circuit or even cut off the service life of electrical appliances, and it will also wet some items such as toilet paper. Moisture and dust are not easy to clean the body, so it is best to close and separate the shower room. At present, most people just separate the shower room, which is very simple and saves the most indoor space. The occupied space is not too large, but it can reasonably block the moisture in the body. The bathroom is very easy to accumulate moisture, so natural ventilation is particularly important. It is best to choose Wei Ming with windows and decorate the bathroom with two open and closed windows.

Panoramic skylight is designed at the opposite corner of the window, which is beneficial to natural ventilation. If it is a dark guard, make the environment clean without mildew, hair and wet insects crawling around. Besides installing high-power and good-performance exhaust fans, we should also pay attention to the area adjacent to the road. Many people like to wrap the water pipes tightly or make a storage cabinet directly under the washstand. Finally, the moisture is wrapped inside, which is unsanitary. After taking a bath in the traditional bathroom, there is a lot of water on the ground, and it is very easy to fall when there are old people and children at home. You can limit the dry and wet zones to prevent this.

It can promote the stronger utilization of indoor space, and the main family members do not disturb each other when washing their faces and taking a bath, especially in small-sized houses. Wet and cold are reduced, and all toilets are more and more clean and tidy, clean and sanitary, and more convenient. Because of dry and wet partitions, bathroom cabinets and electrical appliances, it avoids water vapor and is more durable. The whole shower room is protected, so it is warmer when taking a shower. The purpose of dry and wet zoning is to prevent some items and hardware in the bathroom from staying in a humid environment for a long time and increase the service life. Naturally, if the bathroom is relatively small, it is not recommended to make partition wall and glass sliding door for dry and wet partition, because it is too congested and the experience is not very good. At this time, you can simply not use the shower curtain. The safety factor is strong, and the dry-wet partition greatly reduces the residue of groundwater in wet areas and reduces the safety accidents of wooden floors falling due to water storage.

There are also many electrical appliances, washing machines, electric water heaters and power sockets in the bathroom. Dry and wet zoning can effectively reduce the corrosion of water vapor to electrical appliances and reduce electric shock accidents. The wet and dry partition of the bathroom can completely distinguish the shower room, the bathroom area and the washing area, and move the washing area outside the bathroom and separate it with doors. There should be no dispute between the bathroom and the washing area, and there is no need to rob the bathroom in the morning (some people can't brush their teeth and wash their faces when taking a shower or going to the toilet). This can improve the utilization rate of the area and ensure that the toilet and washbasin will not get wet.