How far is it from Yongtai in Baiyun District to Liwan Bridge?

Driving route: the whole journey is about 22.8 kilometers.

Starting point: Yongtai

1. From the starting point to the east, drive 140m and go straight into Tongtai Road.

2. Drive along Tongtai Road for 390 meters and turn around and enter Tongtai Road.

3. Drive along Tongtai Road 1.2km, cross Yongtai Interchange about 150m and go straight into X27 1.

4. Drive along X27 1 for 580m, turn left slightly and get on the ramp.

5. Drive along the ramp for 260 meters and go straight into South China Expressway.

6. Drive 3.0km along the direction of South China, cross Jiahe Interchange, drive in the direction of Airport Expressway/Huadu Expressway/Leguang Expressway /G4W3, turn right slightly and enter Pingsha Interchange.

7. Drive along Pingsha Interchange for 5 10 meters. After crossing the Pingsha Interchange for about 450 meters, go straight into the airport expressway.

8. Drive along the airport expressway 10.8km, cross the AVIC Building on the right, go to the Inner Ring Road (Line A)/Dongfeng West Road/Zhujiang Tunnel/Ren Minqiao, turn right slightly and get on the ramp.

9. Drive along the ramp for 430m and go straight into the Inner Ring Road.

10. Drive along the inner ring road for 3.0km, cross Xichang overpass, get off at the exit of Zhujiang Bridge/Fangcun/Guangfo Highway/Huancheng Expressway (West Ring Road), turn right slightly, and enter Zhongshan Eighth Road overpass.

1 1. Drive along Zhongshan Eighth Road Interchange for 340 meters, cross Zhongshan Eighth Road Interchange and go straight into the East Bridge of Pearl River Bridge.

12. Drive along the East Bridge of Pearl River Bridge 1. 1 km, and reach the destination (on the left side of the road).

End point: on the bridge