What is the kitchen design process?

The basic process of kitchen decoration is as follows: the basic treatment and inspection of the house → the design and construction of kitchen waterway reconstruction → waterproof painting → tile laying → ceiling installation → cabinet cooker installation → kitchen door installation.

Matters needing attention in kitchen decoration:

1, before decoration, we must check the grassroots, such as the flatness, verticality and firmness of the wall, whether the wall is painted and whether it is qualified.

2. When the kitchen design water circuit is reformed, it is best that the designer of the cabinet is present at the same time, and the hydropower reform scheme is determined according to the design of the cabinet;

3. It is suggested that the kitchen floor must be waterproof. The waterproof of the ground should extend to the wall 30 cm, and the installation position of the cabinet sink should be waterproof to the height of 1 meter. Because most of the water pipes in the kitchen are hidden in the cupboard, once they leak, they will leak downstairs through the contact part between the gas main pipe, the sewer main pipe and the flue and the floor, causing damage to the cupboard downstairs.

4, after the ground waterproof, be sure to do 24-48 hours of closed water test, check whether there is leakage;

5. The height of cabinet countertops should be humanized according to specific users;

6. Do not remove the check valve in the kitchen flue (whether the exhaust port of the range hood is equipped with a check valve or not).

7, kitchen gas pipeline can't do closed guarantee processing;

8. The gas water heater in the kitchen cannot exhaust through the kitchen flue;

9, before the installation work, need to check the construction quality of tile shop is stuck, for empty drum ceramic tile timely rectification and maintenance.