How to make the interlayer better? Is it safe to cast interlayer in place?

Now people like partition houses in duplex type more and more, because there are two floors in the house, and people can arrange different home spaces and environments reasonably according to the spatial structure of the two floors, giving people different psychological feelings. It is more suitable for young people in modern life. But in the face of new house decoration, how to do mezzanine is better? Is the cast-in-place interlayer safe? Let me take you to discuss it. I hope I can help you.

First, how to make the interlayer better-the characteristics of thermocline interlayer

Is the cast-in-place interlayer safe? First of all, let's look at the characteristics of duplex. In short, a space has two floors, which are connected by the design of stairs, and the whole house is connected by elevators. The residential types of mezzanine usually appear in large-sized spaces such as villas, and can also be fashionable commercial houses at this stage. The area of a single floor is not very large, but adding two floors is enough. The functional spaces of mezzanine houses do not interfere with each other, and the upper and lower floors are different. Generally, the lower floor will be set as functional space such as kitchen and living room, and the upper floor will be bedroom and study.

Second, how to make the interlayer better-the treatment method of thermocline interlayer.

Is the cast-in-place interlayer safe? After understanding the characteristics of mezzanine rooms, let's take a look at how to deal with the layout of mezzanine in hard installation construction. Under normal circumstances, the housing treatment of the jumping floor is basically the same as that of ordinary houses, except that the upper and lower floors need to be separated in a space, and other operations are basically unchanged. So you just need to decorate your house according to the steps, but you should be more careful in interior decoration design, because the jump layer separates the upper and lower spaces, which will make the space depressed and affect daily life if you are not careful.

Third, how to make the interlayer better-can the thermocline interlayer be cast in place?

Is the cast-in-place interlayer safe? Next, we need to know whether the mezzanine house can be cast in place. It's normal, but some hard-fitting construction workers are cast-in-place treatment. First, the builders determine and measure the height of a single floor in the house space. And the wall is slotted, generally 8 cm high and 6 cm deep. After that, install the formwork and drill holes for the tank. Generally, drill a 14 cm electric hammer every 12 cm and rinse it with water. After that, it is necessary to tie the steel bars, pour the concrete after the steel bars are tied, and vibrate the poured concrete with a vibrator plate to make its surface smooth.

Four, how to do interlayer-matters needing attention of cast-in-place thermocline interlayer

Is the cast-in-place interlayer safe? Since a house with a jump floor can be cast-in-place, what are the precautions for cast-in-place construction? In the first step of cast-in-place, the slotted body of the wall should be neat and burr-free, and there should be more support when the formwork is installed. There should be no unevenness on the plane, and the groove body can be directly drilled and welded. In the process of binding reinforcement, if the plane is more than 20 square meters, it is best to add beams, and the stairs also need to be added with beams, and wiring pipes should be considered to facilitate the layout and laying of hydropower construction in the future. The poured concrete should be of good quality, the stones should be washed clean, and coarse yellow sand should be used as much as possible. After the concrete is vibrated, it needs to be watered and maintained every day in the climate above 20 degrees Celsius, and the form can be removed in 8 days; The environment below minus 15 degrees Celsius shall be watered and maintained once every two days, and the formwork can be removed in 15 days.