How to connect the hotel network cable to the router

Question 1: How does the hotel network cable connect to the wireless router? Just set the route to AP mode.

Question 2: I want to connect the router directly to the hotel room network. How should I set up the router?

Set according to the following method:

1. When the wireless router is plugged in, connect the mobile phone to the wireless network of the wireless router without connecting the network cable of the room first;

2. Enter the router gateway address in the browser address bar (on the label behind the router), and enter the login user name and password to enter the setup page;

3. Set according to dynamic IP mode;

4. Set the SSID, encryption method and password;

5. Save and restart;

6. After the setup is completed, connect the network cable of the room to the WAN port of the wireless router.

Question 3: How to set up the router connected with the network cable pulled out by the shunt in the hotel?

You can set it according to either of these two setting methods.

The first way

Take the wireless router as a wireless switch, turn off the DHCP function of the router, set the wireless password in wireless management-security management, and finally plug the line of the first router into the Lan port of the wireless router, save and restart the router, and that's it.

Second ways

Plug the broadband network cable into the router's Wan port, and use dynamic IP in Internet access mode, for example, the original 192. 168. 1 was changed to192.1(inside the router is/kloc. The distribution range of DHCP server address pool is changed to192.168.2.2-192.168.2.60. The wireless router can set the wireless password, just save it and restart the router.

If you have any questions, please ask me.

Question 4: How to set up the hotel room network router? Connect a network cable between the WAN port of the wireless router and the network cable socket in the room to set up the router's local area network.

The WAN port uses static IP, and fill in192.168.0.170 255.255.0192.1DNS192 respectively.

Wireless routers can surf the Internet by turning on DHCP.

Found a problem, the IP of the hotel is192.168.0.170, and the gateway is 192. 168. 1, which seems to be somewhat contradictory.

Question 5: How to connect the broadband of the hotel with wireless routing? It is difficult to do WIFI. Log in to the router with192.168.2.1again. . . It is best to change the computer IP manually. It is not difficult to change any route, but it is a bit difficult to change it automatically.

. . . . 1. The local area network is changed to 192. 168.0(2 is also acceptable) 1 and set to the static IP Internet access mode. . IP address192.168.1.114.

The subnet mask is 255.255.255 0 off192.168.1DSN202.96.128.86 202.96.166. Restart. Manual IP192.168.0.15 255.255 0192.168.0.1cannot be found.

Question 6: What connectors are given to the hotel's network cables? Can I connect it directly to the router? The hotel must give you the RJ45 cable crystal plug and plug it directly into the DHCP distribution IP on the computer. If it is not a portable wireless router, but an ordinary wireless router is copied and plugged directly into the wireless switch, it will easily lead to network conflicts and problems in the whole hotel network.

Question 7: Can the network cable in the hotel be connected to the TP wireless router? 1) Yes, add your computer's ip to the wireless routing, and set the routing to a fixed ip. The computer is set to automatically obtain the ip and set the wireless password.

2) If you use a laptop to surf the Internet wirelessly, you don't need a network cable, so you have to add another network cable to your desktop.

Question 8: How to set the network cable of the hotel? Routers need to be configured before they can be used.

As you said, the router should first turn on the DHCP function, set the wireless network and password, and then plug the hotel network cable into Tengda's LAN( 1, 2, 3, 4) port, so that the router can be used as a wireless switch. Try this method ~ ~ ~

Question 9: In the hotel room, there is an interface that can access the Internet by plugging in a network cable. Can you connect the wireless router? Yes, enter the wireless router setup, run the setup wizard, select "Ethernet broadband, automatically obtain IP address (dynamic IP) from network service provider", and then enter the next step until it is completed. At the same time, turn on the wireless function, set the ssid, and restart the router with the encryption settings in the wireless security settings. You will have a wireless network with the ssid you set in the wifi environment, and you can surf the Internet when you are connected.

Question 10: How to set the network cable coming out of the hotel room for 20 minutes and then connect to the wireless route? It can be used for dynamic and static IP. As long as the connected network cable can access the Internet normally, then plug in the WAN number of wireless routing and you can access the Internet wirelessly! Before that, you need to know the IP address and DNS of the network being pulled out (this hotel usually provides it, or explains it, and it is dynamic! )! In addition, your wireless routing IP address cannot be the same network segment as the previous level! If the superior route is 192. 168. 1, then you need to change it to192.168.2.1,otherwise you can't surf the Internet normally!